ECEC1CP103BJ Datasheet, PDF (1/13 Pages) Panasonic Semiconductor – Snap-in Type

Aluminum Electrolytic Capacitors/ UP
Snap-in Type
Series: UP Type : TS
n Features Endurance: 85°C 2000 h
Length 20 mm
RoHS directive compliant
Country of Origin
Japan
Malaysia
U.S.A (ii)
n Recommended Applications
Smoothing circuits, AC adaptor,
n Specifications
(ii_{P) lReeagsearcdhinegckUPSEADpCroAd,}usct,
Catalog.
Category temp. range
-40 to + 85°C
-25 to + 85°C
Rated W.V. Range
16 to 250 V .DC
315 to 450 V .DC
Nominal Cap. Range
120 to 68000 µ F
33 to 820 µ F
Capacitance Tolerance
±20 % (120Hz/+20°C)
DC Leakage Current
3√CV ^{(µA) max. after 5 minutes application of rated working voltage at +20°C.}
C:Capacitance(µF) V: W.V. (V.DC)
tan δ
Please see the attached standard products list
Frequency Correction
Factor for Ripple Current
Frequency (Hz)
Correction Factor ^{16 to 100V}
50
0.93
160 to 450V 0.75
60
0.95
0.80
100
0.99
0.95
120
1.00
1.00
500
1.05
1.20
1k
10k to
1.08 1.15
1.25 1.40
After 2000 hours application of DC voltage with specified ripple current (< rated DC working
voltage) at +85°C, the capacitor shall meet the following limits.
Endurance
Capacitance change ±20 % of initial measured value
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +85±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance.(With voltage treatment)
n Dimensions in mm (not to scale)
Polarity bar PET Sleeve
Vent
(10.0) 2-φ2.0±0.1
10.0±0.1
L+2.0 max
4.0 ± 0.5
0.8⁺-^00..21
Recommended PWB piercing plan
2.0max
Terminal
(t= 0.8)
Bottom of can
1.5 ± 0.2
Standard terminal type does not require
terminal trimming process.
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately.
Mar.2006
 EE174 