ECEC1AA103BJ Datasheet, PDF (1/7 Pages) Panasonic Semiconductor – Snap-in Type

Aluminum Electrolytic Capacitors/ HA
Snap-in Type
Series: HA
n Features
Type : TS
Endurance: 105°C 2000 h
Length 20 mm
RoHS directive compliant
Country of Origin
Japan
Malaysia
U.S.A (ii)
n Recommended Applications
Smoothing circuits, AC adaptor
n Specifications
(ii) Regarding USA product,
Please check PEDCA's
Catalog.
Category temp. range
Rated W.V. Range
-40 to + 105°C
10 to 100 V .DC
-40 to + 105°C
160 to 250 V .DC
-25 to + 105°C
315 to 400 V .DC
Nominal Cap. Range
Capacitance Tolerance
330 to 68000 µ F
68 to 470 µ F
±20 % (120Hz/+20°C)
33 to 120 µ F
DC Leakage Current
3√CV ^{(µA) max. after 5 minutes application of rated working voltage at +20°C.}
C:Capacitance(µF) V: W.V. (V.DC)
tan δ
Please see the attached standard products list
Frequency (Hz)
Frequency Correction
Factor for Ripple Current 10 to 100V
50
60
100
0.93 0.95 0.99
160 to 400V
0.75 0.80 0.95
120
1.00
1.00
500
1.05
1.20
1k 10k to
1.08 1.15
1.25 1.40
After 2000 hours application of DC voltage with specified ripple current (< rated DC working
voltage) at +105°C, the capacitor shall meet the following limits.
Endurance
Capacitance change ±20 % of initial measured value
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
Shelf Life
After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
n Dimensions in mm (not to scale)
Polarity bar PET Sleeve
Vent
(10.0) 2-φ2.0±0.1
10.0±0.1
L+2.0 max
4.0 ± 0.5
Recommended PWB piercing plan
0.8⁺-^00..21
2.0max
Terminal
(t= 0.8)
Bottom of can
1.5 ± 0.2
Standard terminal type does not require
terminal trimming process.
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately.
Mar.2006
 EE148 