ECA0JHG221_16 Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – Radial Lead Type

Aluminum Electrolytic Capacitors (Radial Lead Type)
Radial Lead Type
Series : NHG Type : A
Features
● _{Endurance : 105 °C 1000 h to 2000 h}
● _{RoHS compliant}
Specifications
Category temperature range
–55 °C to +105 °C
–25 °C to +105 °C
Rated voltage range
6.3 V.DC to 100 V.DC
160 V.DC to 450 V.DC
Capacitance range
2.2 µF to 22000 µF
1 µF to 330 µF
Capacitance tolerance
±20 % (120 Hz/+20 °C)
Leakage current
I < 0.01 CV or 3 (µA) After 2 minutes
(Which is greater)
I < 0.06 CV +10 (µA) After 2 minutes
Dissipation factor (tan d)
Please see the attached characteristics list
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The
sum of DC and ripple peak voltage shall not exceed the rated working voltage), When the
capacitors are restored to 20 °C, the capacitors shall meet the limits specified below.
Endurance
Shelf life
Duration : 6.3 V.DC to 100 V.DC : (05 to 08)=1000 hours, (010 to 018)=2000 hours
160 V.DC to 450 V.DC : 2000 hours
Capacitance change Within ±20 % of the initial value
tan d
< 200 % of the initial limit
DC leakage current Within the initial limit
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
Frequency correction factor for ripple current
Rated voltage
(V.DC)
6.3 to 100
160 to 450
Capacitance
(µF)
2.2 to 33
47 to 470
1000 to 22000
1 to 330
60
0.75
0.80
0.85
0.80
Frequency (Hz)
120
1k
10 k
1.00
1.55
1.80
1.00
1.35
1.50
1.00
1.10
1.15
1.00
1.35
1.50
100 k
2.00
1.50
1.15
1.50
Dimensions
Pressure relief
06.3 <
Sleeve
L^✽
✽ L < 16 : L±1.0
L > 20 : L±2.0
+
–
14 min. 3 min.
0D
5
6.3
8
0d
0.5
0.5
0.6
F
2.0
2.5
3.5
< 08
0D±0.5
10
12.5
0.6
0.6
5.0
5.0
010<
0D±0.5
16
0.8
7.5
(Unit : mm)
18
0.8
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
04 Mar. 2016