English
Language : 

ECA0JHG221_13 Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors NHG
Radial Lead Type
Series: NHG Type: A
■ Features
● Endurance : 105 °C 1000 h to 2000 h
● RoHS directive compliant
Aluminum Electrolytic Capacitors/ NHG
■ Specifications
Category Temp. Range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
tan δ
–55 °C to +105 °C
–25 °C to +105 °C
6.3 V.DC to 100 V.DC
160 V.DC to 450 V.DC
0.1 µF to 22000 µF
1.0 µF to 330 µF
±20 % (120 Hz/+20 °C)
I < 0.01 CV or 3 (µA) After 2 minutes
(Which is greater)
I < 0.06 CV +10 (µA) After 2 minutes
Please see the attached standard products list
After following life test with DC voltage and +105 °C±2 °C ripple current value applied (The sum
of DC and ripple peak voltage shall not exceed the rated working voltage), When the capacitors
are restored to 20 °C, the capacitors shall meet the limits specified below.
Endurance
Duration : 6.3 V.DC to 100 V.DC : (φ5 to φ8)=1000 hours, (φ10 to φ18)=2000 hours
160 V.DC to 450 V.DC : 2000 hours
Shelf Life
Capacitance change ±20 % of initial measured value
tan δ
< 200 % of initial specified value
DC leakage current < initial specified value
After storage for 1000 hours at +105 °C±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
■ Frequency correction factor for ripple current
W.V.(V.DC)
6.3 to 100
160 to 450
Cap. (µF)
0.1 to 33
47 to 470
1000 to 22000
1 to 330
60
0.75
0.80
0.85
0.80
Frequency (Hz)
120
1k
10 k
1.00
1.55
1.80
1.00
1.35
1.50
1.00
1.10
1.15
1.00
1.35
1.50
100 k
2.00
1.50
1.15
1.50
■ Dimensions in mm (not to scale)
Pressure relief
φ6.3<
Sleeve
L✽
✽ L<16 : L±1.0
L>20 : L±2.0
φd±0.05
+
–
14 min. 3 min.
φ5 to φ8
φD±0.5
(Unit : mm)
φ10<
φD±0.5
Body Dia. φD
5
6.3
8
10
12.5
16
18
Lead Dia. φd
0.5
0.5
0.6
0.6
0.6
0.8
0.8
Lead space F
2.0
2.5
3.5
5.0
5.0
7.5
7.5
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
– EEE-99 –
00 Nov. 2012