ECA-1HHG100 Datasheet, PDF (1/5 Pages) Panasonic Semiconductor – Aluminum Electrolytic Capacitors/NHG

Aluminum Electrolytic Capacitors/NHG
Radial Lead Type
Series: _NHG Type : _A
n Features _{Endurance: +105°C 1000 to 2000 h}
Smaller than Series NHE
Country of Origin
Japan
Malaysia
China
Taiwan
n Specifications
Category temp. range
Rated W.V. Range
Nominal Cap. Range
Capacitance Tolerance
DC Leakage Current
-55 to +105°C
-25 to +105°C
6.3 to 100 V.DC
160 to 450 V .DC
0.1 to 22000 µF
1.0 to 330 µ F
± 20 % (120Hz/+20°C)
I ^<= 0.01 CV or 3(µ A) after 2 minutes appli- I ^<= 0.06 CV + 10(µ A) after 2 minutes appli-
cation of rated working voltage at +20°C cation of rated working voltage at +20°C
tan δ
Please see the attached standard products list
Endurance
After following life test with DC voltage and +105±2°C ripple current value applied (The sum of
DC and ripple peak voltage shall not exceed the rated working voltage), the capacitors shall
meet the limits specified below.
Duration : 6.3 to 100V.W. ; (φ5 to 8) =1000 hours , (φ10 to 18)= 2000 hours
160 to 450V.W. ;
2000 hours
Post test requirements at +20 °C
Shelf Life
Capacitance change ±20% of initial measured value
tan δ
<= _{200 % of initial specified value}
DC leakage current ^<= initial specified value
After storage for 1000 hours at +105±2 °C with no voltage applied and then being stabilized
at +20 °C, capacitors shall meet the limits specified in Endurance. (With voltage treatment)
n Frequency correction factor for ripple current
çW.V. (V.DC)
6.3 to 100
160 to 450
Cap. (µF)
0.1
47
1000
1
to 33
to 470
to 22000
to 330
60
0.75
0.80
0.85
0.80
Frequency(Hz)
120
1k
10k
1
1.55 1.80
1
1.35 1.50
1
1.10 1.15
1
1.35 1.50
100k
2.00
1.50
1.15
1.50
n Dimensions in mm (not to scale)
Sleeve
( ^>= 6.3mm dia)
Vent
φd±0.05
φ10 ^<=
φ8 ^>=
L
L
L
<=<=
16:L+1.0
20:L+2.0
max
max
14 min
3 min
φD+0.5 max
Body Dia. φD 5
6.3
8
10 12.5 16
18
Lead Dia. φd 0.5 0.5 0.6 0.6 0.6 0.8 0.8
Lead space P 2.0 2.5 3.5 5.0 5.0 7.5 7.5
φD+0.5 max
Design, and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase
and / or use. Should a safety concern arise regarding this product,please be sure to contact us immediately.
Mar. 2005
 EE90 