ATX5 Datasheet, PDF (1/7 Pages) Panasonic Semiconductor – NARROW-PITCH, THIN AND SLIM CONNECTOR FOR BOARD-TO-FPC CONNECTION

NARROW-PITCH, THIN
AND SLIM CONNECTOR
FOR BOARD-TO-FPC
CONNECTION
AXT5, 6
NARROW PITCH (0.4 mm)
CONNECTORS F4S SERIES
Socket
Header
FEATURES
1. Space-saving (3.6 mm widthwise)
The required space is smaller than our
F4 series (40-contact type):
Socket — 27% smaller,
Header — 38% smaller
The small size contributes to the
miniaturization of target equipment.
3. The simple lock structure gives
tactile feedback that ensures a
superior mating/unmating operation
feel.
Compliance with RoHS Directive
Socket
3.60
Clips (soldering terminal)*
at the four corners
10.50 ^{(40 contacts)}
Pickup width: 0.8mm
Clips (soldering terminal)*
at the four corners
Header
2.60
9.80 ^{(40 contacts)}
* Clips for preventing the solder joints from being removed
2. Highly reliable
has strong
resistance to adverse environments.
(See Page 6 for details of the structure)
Note: If extra resistance to shock caused by dropping
is required, we recommend using our previous
F4 Series.
Simple lock structure
4. Gull-wing type terminals
The gull-wing type terminals facilitate
automatic mounting inspections.
5. Connectors for inspection available
Connectors for inspection are available
that are ideal for modular unit inspection
and inspection in device assembly
processes.
APPLICATIONS
Compact portable devices “Cellular
phones, DVC, Digital cameras, etc”
Example of Board-to-FPC connections
Before
FPC
mating ^Narrow-pitch
connectors F4S
After
mating
Reinforcing plate
Reinforcing
plate
(with FPC)
PCB
1.0mm
The simple lock mechanism ensures that the
connector clicks into position when it is inserted
for reliable single-action insertion on the PCB.
ORDERING INFORMATION
AXT
4
5: Narrow Pitch Connector F4S (0.4 mm pitch) Socket
6: Narrow Pitch Connector F4S (0.4 mm pitch) Header
Number of contacts (2 digits)
Mated height
<Socket>
1: For mated height 1.0 mm
2: For mated height 1.2 mm
<Header>
1: For mated height 1.0 mm
2: For mated height 1.2 mm
Functions
<Socket, Header>
2: Without positioning bosses
Surface treatment (Contact portion / Terminal portion)
<Socket>
4: Base: Ni plating Surface: Au plating (for Ni barrier available)
<Header>
4: Base: Ni plating Surface: Au plating
Note: Please note that models with a mated height of 1.0 mm (7th digit of part number is “1”) and 1.2 mm (7th digit of part number is “2”) are not compatible.
panasonic-electric-works.net/ac