APT1211S Datasheet, PDF (1/8 Pages) Panasonic Semiconductor – Phototriac coupler ideal for triac driver with wide variation Triac driver for SSRs

APT1
Phototriac coupler
ideal for triac driver
with wide variation
VDE
APT
Phototriac Coupler
FEATURES
1. Low zero-cross voltage (max. 15 V)
type added to lineup. Approximately
1/3 of previous product
Helps reduce device noises even further.
Load voltage
Previous product: max. 50 V
New product: max. 15 V
TYPICAL APPLICATIONS
1. For triac driver in heater controls of
products such as office equipment,
home appliances, and industrial
machines. (For 100V/200V, 50/60 Hz
lines)
2. Triac driver for SSRs
High noise
Large
interfering wave
1
41
6
Low noise
Small
interfering wave
2
2
ZC
Zero-cross circuit
33
ZC
4 ^{2. Two types available: Random type}
Zero-cross circuit
and zero-cross type
1
41
6 ^{3. Many package sizes available.}
(Wide terminal type with 10.16 mm
2
pitch between I/O terminals available.)
2
33
4 ^{4. High dielectric strength. (Between}
input and output: SOP 3, 750 V; DIP
5,000 V)
5. Handles both 100 and 200 V AC
loads
This relay handles both voltages in a
single product it is not necessary for
users that use both types to manage
separate part numbers.
RoHS compliant
6. Terminal 5 of the DIP 6-pin type is
completely molded.
TYPES
1. SOP4 Type
Output rating
Type _{Repetitive peak ON-state RMS}
OFF-state voltage
current
AC
type
600 V
50 mA
Type
Package
size
Zero-cross
(max. 50 V)
Zero-cross
(max. 15 V)
SOP4pin
Random
Tube packing
style
APT1211S
APT1231S
APT1221S
Part No.
Packing quantity
Tape and reel packing style
Tube
Tape and reel
APT1211SX
(Picked from the
1/2-pin side)
APT1231SX
(Picked from the
1/2-pin side)
APT1221SX
(Picked from the
1/2-pin side)
APT1211SZ
(Picked from the
3/4-pin side)
APT1231SZ
(Picked from the
3/4-pin side)
APT1221SZ
(Picked from the
3/4-pin side)
1 tube contains:
100 pcs.
1 batch contains:
2, 000 pcs.
1, 000 pcs.
Note: For space reasons, the initial letters of the product number “APT” and “S” are omitted on the product seal.
The package type indicator “X” and “Z” are omitted from the seal. (Ex. the label for product number APT1221SZ is 1221).
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e/
ASCTB217E 201201-T1