|
AN8015SH Datasheet, PDF (1/14 Pages) Panasonic Semiconductor – Single-channel step-down, step-up, or inverting use DC-DC converter control IC | |||
|
Voltage Regulators
AN8015SH
Single-channel step-down, step-up, or inverting use
DC-DC converter control IC
s Overview
The AN8015SH is a single-channel DC-DC converter
control IC using the PWM method.
1
10
This IC can provide any one output type from among
step-down, step-up and inverting output.
5
6
Its operating supply voltage range is wide and its
consumption current is small. In addition, since it uses the
10-pin surface mounting type package with 0.5 mm pitch,
it is suitable for highly efficient miniature potable power
supply, especially for a negative output power supply.
s Features
⢠Wide operating supply voltage range (3.6 V to 34 V)
⢠Small consumption current (1.8 mA typical)
⢠Converter control in a wide output frequency range is
0.5±0.2
4.3±0.30
6.3±0.30
SSOP010-P-0225
possible (2 kHz to 500 kHz).
⢠Built-in timer latch short-circuit protection circuit (charge current 1.1 µA typical)
⢠Incorporating the under-voltage lock-out (U.V.L.O.) circuit
⢠Incorporating a high precision reference voltage circuit (2.46 V (allowance: ± 3%))
⢠Output block is open-collector (darlington) type.
⢠High absolute maximum rating of output current (100 mA)
⢠Maximum duty ratio is fixed and has small sample-to-sample variations (90% ± 5%).
⢠Using 10-pin small outline package of 0.5 mm pitch
Unit: mm
s Applications
⢠LCD displays, digital still cameras, and PDAs
s Block Diagram
Reference
supply 2.46 V
(allowance : ± 3%)
0.5 V
Triangular
wave OSC
1.2 V
0.37 V
PWM
comparator
5 Out
IN+ 8 Error amp. S.C.P. comp.
INâ 9
FB 10
1.83 V
Clamp
I VREF
1.11 V
SR R O
Latch U.V.L.O.
4 GND
1
|
▷ |