AN2526NFH Datasheet, PDF (1/35 Pages) Panasonic Semiconductor – Automotive LCD TV signal processor IC

ICs for TV
AN2526NFH
Automotive LCD TV signal processor IC
I Overview
The AN2526NFH is a video signal processing IC with
an LCD's 5 V-source driving power supply for TFT color
LCD (normally white type), and it supports NTSC and
PAL systems. The main circuitry of this IC includes video-
signal processing circuit, color signal processing circuit,
interface circuit, synchronizing circuit and many color
quality adjusting circuits. This IC converts the composite
video signal or separated Y/C signal or RGB signals into
RGB signals available for TFT color LCD.
I Features
• Supply voltage: 5 V/7.5 V
• Built-in LCD's 5 V-source driving power supply
• Low consumption power (typ. 260 mW)
• Supporting NTSC and PAL
• Supporting composite, component and color differen-
tial signal input
• Video signalɼanalog RGB (2 systems)
One is for OSD (analog/digital).
• Each mode setting is possible with 3-wire or I²C Bus
control.
• Electronic volume (D/A converter) built in
• Contrast/Brightness/γ correction circuit built in
• Horizontal and vertical display position adjustment are
possible by serial control.
• Package: QFP-64HP10L (10 × 10 × 1.95 mm)
• Difference from the AN2526FH
Compared to the AN2526FH, the sync. system gain is
increased in no signal input. This may cause the picture
on the screen to be swaying horizontally. So we cannot
recommend this IC to be used in the set with no-signal
input mode.
I Applications
• 4 inches to 7 inches middle size TFT LCD equipment
of normally white, of such as in-car TV, an LCD monitor
for car navigation system.
12.00±0.20
10.00±0.20
48
33
49
32
Unit: mm
64
1
(1.25)
17
0.50
16
0.18^{+−00..1005}
(1.00)
Seating plane
0° to 10°
0.50±0.20
QFP064-P-1010
Note) The package of this product will be changed
to lead-free type (QFP064-P-1010A). See the
new package dimensions section later of this
datasheet.
Publication date: November 2001
SDB00080AEB
1