ABS1414519 Datasheet, PDF (1/11 Pages) Panasonic Semiconductor – HIGH ENVIRONMENTAL RESISTANCE

VDE
HIGH ENVIRONMENTAL ^{TURQUOISE SWITCHES}
RESISTANCE
ABS TYPE
19.3
6.4
11.1
FEATURES
• Subminiature size (19.8×11.1×6.4 mm)
• Sealed construction for use in adverse environment-Sealed construction by
epoxy resin and rubber cap greatly reduces possible miscontact due to
contaminants such as dust. Conforming to IP67* of IEC protective construction
classification
• Elastomer double molding technology, an industry first and ultrasonic swaging
technology contribute to uniform sealing in high production quantities
• Expansion of low-level circuit type
• We offer a Au clad 2-ply contact type (for small loads) that we developed
specifically for small current and voltage loads in the range of 1 mA to 100 mA
and 5 V to 30 V.
• UL/CSA/VDE/SEMKO approved
(AS for Au-clad twin layer, VDE and SEMKO are not approved.)
* Based on the protective construction classification of IEC, items which satisfy the test
requirements are denoted with an IP designation.
RoHS compliant
TYPICAL APPLICATIONS
• Automotive
• Home appliances (vacuum cleaner, air purifier)
• Others (gas cooking range)
ORDERING INFORMATION
Ex. ABS 1 1 1 0 4 0 3
Type of
switch
Wire and
terminal
position
Terminal
Contact
arrangement
Actuator
Operating
force by
pin plunger
(max.)
Contact*
Agency standard
ABS:
1: Straight type 1: .110 quick-connect
Turquoise 4: Right angle terminal
switch 5: Left angle 4: Solder terminal
S type
5: PC board terminal
6: Wire leads
1: SPDT 0: Pin plunger
2: SPST-NC 1: Short hinge lever
3: SPST-NO 2: Hinge lever
3: Long hinge lever
4: Simulated roller
lever
6: Roller lever
8: Leaf lever
4: 0.98 N
5: 1.47 N
0: AgNi alloy
1: Au-clad
triple layer
4: Au-clad
double layer
3: UL/CSA/VDE/SEMKO
(AgNi alloy contact,
Au-clad triple layer type)
9: UL/CSA
(Au-clad double layer type)
Remarks: 1. Standard packing: Dust protected type 100 pcs./carton, 1,000 pcs./case; Immersion protected type 50 pcs./case.
2. SPST-NC and SPST-NO are only available for wire leads type.
3. Leaf lever is only available for wire leads type
4. Wire leads type with agency standard will be discontinued from August 31, 2012.
5. As for wire position:
Straight type
Wire opposite to the
actuator side type
(Right angle)
Wire actuator side type
(Left angle)
5. Not every combination is available. Please refer to the following table, “PRODUCT TYPES”.
* Contact
0: AgNi alloy
AgNi alloy
1: Au-clad triple layer
Au-clad
CuNi alloy
AgNi alloy
4: Au-clad double layer
Au-clad
CuNi alloy
Panasonic Corporation Automation Controls Business Unit industrial.panasonic.com/ac/e
AECTB2E 201201-T