ABC0000CE19 Datasheet, PDF (1/1 Pages) Panasonic Semiconductor – Electric Double Layer Capacitors (Gold Capacitor)

Electric Double Layer Capacitors (Gold Capacitor)/ EN
Surface Mount Type
Series: _EN
■ Features
● Re-flow soldering method available (250 °C)
● Miniaturized : Longer life and environmentally friendly
● RoHS directive compliant
■ Recommended Applications
● Memory cards(power supply to hold memory),
mobile phones, PDAs, digital cameras.
■ Specifications
Category Temp. Range
–10 °C to +60 °C
Maximum Operating Voltage
3.3 V.DC
Nominal Capacitance
0.2 F
Maximum Operating Current
10 µA max.
Category temp. range (–10 °C)
Stability at low
temperature and high
temperature
Capacitance change ±30 % of initial measured value at +20 °C
Internal resistance <10 times of initial measured value at +20 °C
Category temp. range (+60 °C)
Capacitance change ±30 % of initial measured value at +20 °C
Internal resistance < measured value at +20 °C
After 500 hours application of 3.3 V. DC at +60 °C, the capacitor shall meet the following limits.
Endurance
Capacitance change ±30 % of initial measured value
Internal resistance 4 kȑ or less
After 500 hours storage at +60°C without load, the capacitor shall meet the following limits.
Shelf Life
Capacitance change ±30 % of initial measured value
Internal resistance 1 k ohm or less
High temperature
High humidity
After 500 hours storage at +40 °C, 90 to 95 % R.H., the capacitor shall meet the specified
limits for shelf life.
■ Dimensions in mm(not to scale)
Type AK
6.8 max.
1.4±0.2
+
1.9±0.2
–
Type RK
Type J2
0.9±0.3
0.15±0.05
6.8 max.
(0.1±0.3)
1.8 max.
+
–
1.8 max.
–
2.38±0.35
0.5±0.1
2±0.3
+
0.5±0.1
0.9±0.3
φ6.8 max.
5.0–
0
0.2
0.15±0.03
F 01
23
5.0
–
0
0.2
1.85 max.
■ Standard Products
Maximum
Operating
Voltage
(V.DC)
Capacitance
(F)
Capacitance
range
(F)
Internal
resistance
(ȑ) at 1kHz
Mass
(g)
Part number
Min. Packaging
Q’ty
Reel (pcs)
3.3
0.2
0.16 to 0.36
< 200
0.2 (Approx.) EECEN0F204( )
2000
The re-flow condition / taping dimensions are explained on p.197, 198 of our Catalog.
Please use it as a reference guide.
( ) : Please use AK, RK or J2 to indicate terminal type.
Note : 1. When the capacitor is being used in a high temperature and high humidity environment for a long period, brown deposited
materials might be found around the sealing area. However, the materials are insulators and will not affect any electrical
characteristics of the capacitor.
2. Do not use reflow soldering when cell voltage is above 0.3 V.
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
Feb. 2008