63SXV33M Datasheet, PDF (1/1 Pages) Panasonic Semiconductor – Conductive Polymer Aluminum Solid Capacitors + –

Conductive Polymer Aluminum Solid Capacitors
Surface Mount Type
Series : SXV
Features
● _{Super high voltage (100 V.DC max.)}
● _{RoHS compliance, Halogen free}
Specifications
Size code
E7
F8
E12
Category temperature range
–55 °C to +125 °C
Rated voltage range
100 V.DC
63 V.DC to 100 V.DC
Rated capacitance range
6.8 µF
15 µF
15 µF to 33 µF
Capacitance tolerance
±20 % (120 Hz / + 20 °C)
Leakage current
Please see the attached characteristics list
Dissipation factor (tan d)
Please see the attached characteristics list
+125 °C, 1000 h, rated voltage applied
Endurance
Capacitance change Within ±20 % of the initial value
tan d
< 200 % of the initial limit
DC leakage current Within the initial limit
+60 °C, 90 % to 95 %, 1000 h, No-applied voltage
Damp heat
Capacitance change Within ±20 % of the initial value
(Steady State)
tan d
< 150 % of the initial limit
DC leakage current Within the initial limit (after voltage processing)
F12
100 V.DC
18 µF to 22 µF
Marking
Polarity marking (−)
Lot. No.
Series
R. Capacitance
R. Voltage
Dimensions (not to scale)
0.2 max.
W
–
+
L
R
Unit : mm
Size
code
fD±0.5
L +0.1
−0.4
W±0.2 H±0.2
E7 8.0 6.9 8.3 8.3
F8 10.0 7.9 10.3 10.3
E12 8.0 11.9 8.3 8.3
F12 10.0 12.6 10.3 10.3
✽ Externals of figure are the reference.
C±0.2 R P±0.2
9.0 0.6 to 0.8 3.2
11.0 0.6 to 0.8 4.6
9.0 0.8 to 1.1 3.2
11.0 0.8 to 1.1 4.6
Characteristics list
Series
SXV
Rated Rated ^{Case size (mm)}
voltage capacitance
(V.DC) (µF) ^fD
L
63 33 8.0 11.9
6.8 8.0 6.9
15 10.0 7.9
100 15 8.0 11.9
18 10.0 12.6
22 10.0 12.6
Specifications
Size
code
Ripple ^✽1
current
(mAr.m.s.)
Allowable ^✽1
ripple current
(mAr.m.s.)
ESR ^✽2
(mΩ max.)
tan d ^✽3
E12 930 2950 25 0.12
E7 340 1100 60 0.12
F8 630 2000 60 0.12
E12 730 2350 40 0.12
F12
940
940
3000
3000
30
30
0.12
0.12
✽1 Ripple current (100 kHz/ +105 °C < Tx < 125 °C), Allowable ripple current (100 kHz / Tx < 105 °C)
✽2 ESR (100 kHz to 300 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes
◆ Please refer to each page in this catarog for “Reflow conditions” and “Taping specifications”.
LC ^✽4
(µA)
104
34
75
75
90
110
Standard (Reel size : f380)
Part number
Min.
Packaging Q'ty
(pcs)
63SXV33M
400
100SXV6R8M 1000
100SXV15MX
500
100SXV15M
400
100SXV18M
400
100SXV22M
400
Frequency correction factor for ripple current
Frequency
Coefficient
120 Hz < f < 1 kHz
0.05
1 kHz < f < 10 kHz
0.3
10 kHz < f < 100 kHz 100 kHz < f < 500 kHz
0.7
1
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
02 Apr. 2017