English
Language : 

2SEPC100MZ Datasheet, PDF (1/2 Pages) Panasonic Semiconductor – Radial Lead Type
Conductive Polymer Aluminum Solid Capacitors
Radial Lead Type
Series : SEPC
Features
● Super low ESR (5 mΩ to 24 mΩ)
● Large capacitance (2700 μF max.)
● RoHS compliance, Halogen free
Specifications
Size code
B9
C55
C6
C9
E7
E9
E12
E13
F13
Category temperature range
–55 °C to +105 °C
Rated voltage range (V.DC) 2.5
6.3
2.5 to 16
6.3 to 16 2.5 to 16 16 2.5 to 6.3 2.5 to 16
Rated capacitance range (μF) 100 to 560 220 100 to 560 100 to 820 150 to 1000 180 to 1000 180 to 270 470 to 820 470 to 2700
Capacitance tolerance
±20 % (120 Hz / + 20 °C)
Leakage current
Please see the attached characteristics list
Dissipation factor (tan d)
Please see the attached characteristics list
+105 °C, 5000 h, rated voltage applied
Endurance
Capacitance change Within ±20 % of the initial value
tan d
< 150 % of the initial limit
DC leakage current Within the initial limit
+60 °C, 90 % to 95 %, 1000 h, No-applied voltage
Damp heat
(Steady State)
Capacitance change Within ±20 % of the initial value
tan d
< 150 % of the initial limit
DC leakage current Within the initial limit (after voltage processing)
Marking
Polarity marking (−)
Lot. No.
Series
R. Capacitance
R. Voltage
Dimensions (not to scale)
E12, E13, F13 Size
fd
+
–
15 min. 4 min.
L
19 min.
B9, C55, C6, C9, E7, E9 Size
fd
+
–
15 min. 4 min.
L
19 min.
B9, C55, C6, C9, E7, E9 size flat rubber is used.
✽ Externals of figure are the reference.
Unit : mm
Size code fD±0.5 L max. F±0.5 fd±0.05
B9 5.0 9.0 2.0 0.6
C55 6.3 5.5 2.5 0.45
C6
6.3 6.0 2.5 0.45 ✽1
C9 6.3 9.0 2.5 0.6
E7
8.0 7.0 3.5 0.6 ✽2
E9 8.0 9.0 3.5 0.6
E12 8.0 12.0 3.5 0.6
E13 8.0 13.0 3.5 0.6
F13 10.0 13.0 5.0 0.6
✽1 2SEPC390M, 2SEPC560M : 0.5±0.05
✽2 16SEPC150MD, 10SEPC270M : 0.45±0.05
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
01 Nov. 2015