16SEPG270M Datasheet, PDF (1/1 Pages) Panasonic Semiconductor – Conductive Polymer Aluminum Solid Capacitors

Conductive Polymer Aluminum Solid Capacitors
Radial Lead Type
Series : SEPG
Features
● _{High ripple current (5800 mA.r.m.s.)}
● _{RoHS compliance, Halogen free}
Specifications
Size code
C10
Category temperature range
–55 °C to +105 °C
Rated voltage range
16 V.DC
Rated capacitance range
270 µF
Capacitance tolerance
±20 % (120 Hz / + 20 °C)
Leakage current
Please see the attached characteristics list
Dissipation factor (tan d)
Please see the attached characteristics list
+105 °C, 5000 h, rated voltage applied
Endurance
Capacitance change Within ±20 % of the initial value
tan d
< 150 % of the initial limit
DC leakage current Within the initial limit
+60 °C, 90 % to 95 %, 1000 h, No-applied voltage
Damp heat
(Steady State)
Capacitance change Within ±20 % of the initial value
tan d
< 150 % of the initial limit
DC leakage current Within the initial limit (after voltage processing)
Marking
Polarity marking (−)
Lot. No.
Series
R. Capacitance
R. Voltage
Dimensions (not to scale)
L max.
fd±0.05
+
–
15 min. 4 min.
19 min.
Size code fD±0.5 L max.
C10
6.3
10.0
✽ Externals of figure are the reference.
F±0.5
2.5
Unit : mm
fd±0.05
0.5
Characteristics list
Series
SEPG
Rated Rated ^{Case size (mm)}
voltage capacitance
(V.DC) (µF)
fD
L
16
270
6.3 10.0
Size
code
C10
Specifications
Ripple ^✽1
current
(mAr.m.s.)
ESR ^✽2
(mΩ max.)
tan d ^✽3
5800
8
0.12
LC ^✽4
(µA)
864
✽1 Ripple current (100 kHz/ +105 °C ), ✽2 ESR (100 kHz/+20 °C) ✽3 tan d (120 Hz/+20 °C) ✽4 After 2 minutes
◆ Please refer to each page in this catarog for “Flow conditions” and “Taping specifications”.
Part number
16SEPG270M
Frequency correction factor for ripple current
Frequency
Coefficient
120 Hz < f < 1 kHz
0.05
1 kHz < f < 10 kHz
0.3
10 kHz < f < 100 kHz 100 kHz < f < 500 kHz
0.7
1
Design and specifications are each subject to change without notice. Ask factory for the current technical specifications before purchase and/or use.
Should a safety concern arise regarding this product, please be sure to contact us immediately.
00 Oct. 2016