LPU-200C Datasheet, PDF (5/8 Pages) PAIRUI GROUP INC. – Constant current LED Drivers

Constant current LED Drivers
For outdoor use
LPU-200C Series, 200Watt
ELECTRICAL
Parameters
Over Voltage
Symbols
V_OVP
Protection
Test Conditions / Comment
---
Min. Typ. Max.
-- 110% 150%
Units
V_out
Short Circuit
Hiccup mode, it will recover automatically after fault conditions remove
Over Temperature
T_OTP
If the temperature exceeds OTP
point, the output current of the 90 95
driver is automatically reduced.
Environment
Storage Temperature
Ambient Operating
Temperature
Maximum Case
Temperature
Operating Relative
Humidity
Life Time
MTBF
T_storage
T_a
T_C
H_a
T_Life
T_MTBF
Humidity: 5% RH to 95% RH
-40
--
Startup at rated voltage
-40
--
Hot-spot on case
--
--
Non condensing
10
--
℃ Full load, case temperature 55
50
--
Full load, 220Vac input,
℃ 25 ambient temperature
200 --
Net Weight
W_NBT
---
-- 940
Dimension(LxWxH)
222 x 70 x 34mm
EMC Compliance
EN55015
Conducted Emission & Radiated Emission
EN61000-3-2 Class C Harmonic Current Emission
EN61000-3-3
Voltage fluctuation and flicker
FCC Part 15 Class B Conducted and Radiated Emission Measurement
EN61547
Equipment for general lighting purposes: EMC Immunity Requirements
EN61000-4-2
Electrostatic Discharge (ESD). Air Discharge: 15kV; Contact Discharge: 8kV
EN61000-4-3
EN61000-4-4
EN61000-4-5
EN61000-4-6
EN61000-4-8
Radiated Radio-Frequency electromagnetic field
Electrical Fast Transient / burst
Surge Immunity Test: L-N 6KV, L/N-GND 6KV
Conducted disturbances induced by Radio-Frequency fields
Power Frequency Magnetic Field Test
www.pairuigroup.com
Page: 5 / 8
100
℃
+85
℃
+70
℃
+90
℃
95
%
--
kHrs
--
kHrs
--
g
Date: 04/29/2014