LPU-100C Datasheet, PDF (5/8 Pages) PAIRUI GROUP INC. – Constant current LED Drivers

Constant current LED Drivers
For outdoor use
LPU-100C Series, 100Watt
ELECTRICAL
Parameters
Over Temperature
Symbols
T_OTP
Storage Temperature
T_storage
Protection
Test Conditions / Comment
Min. Typ. Max. Units
If the temperature exceeds OTP
point, the output current of the
90
95
100
℃
driver is automatically reduced.
Environment
Humidity: 5% RH to 95% RH
-40
--
+85
℃
Ambient Operating
Temperature
T_a
Maximum Case
Temperature
T_C
Operating Relative
Humidity
H_a
Life Time
T_Life
Startup at rated voltage
-40
Hot-spot on case
--
Non condensing
10
℃ Full load, case temperature 55
50
--
+70
℃
--
+90
℃
--
95
%
--
--
kHrs
MTBF
T_MTBF
Full load, 220Vac input,
℃ 25 ambient temperature
200
--
--
kHrs
Net Weight
W_NBT
---
--
790
--
g
Dimension(LxWxH)
192 x 70 x 34mm
EMC Compliance
EN55015
Conducted Emission & Radiated Emission
EN61000-3-2 Class C Harmonic Current Emission
EN61000-3-3
Voltage fluctuations and flicker
FCC Part 15 Class B Conducted and Radiated Emission Measurement
EN61547
Equipment for general lighting purposes: EMC Immunity Requirements
EN61000-4-2
Electrostatic Discharge (ESD). Air Discharge: 15kV; Contact Discharge: 8kV
EN61000-4-3
Radiated Radio-Frequency electromagnetic field
EN61000-4-4
Electrical Fast Transient / burst
EN61000-4-5
Surge Immunity Test: L-N 6KV, L/N-GND 6KV
EN61000-4-6
Conducted disturbances induced by Radio-Frequency fields
EN61000-4-8
Power Frequency Magnetic Field Test
EN61000-4-11 Voltage Dips, short interruptions and Voltage Variations
℃ Note: Unless otherwise specified, all the above parameters are measured at ambient temperature of 25 and Vin
= 100Vac to 277Vac.
www.pairuigroup.com
Page: 5 / 8
Date: 04/29/2014