SACB5.0 Datasheet, PDF (2/3 Pages) UN Semiconducctor INC – Surface Mount Transient Voltage Suppressors (TVS)

SACB SERIES
LOW CAPACITANCE TRANSIENT VOLTAGE SUPPRESSOR
STAND-OFF VOLTAGE5.0 - 50 Volts
500 watt Peak Pulse Power
DO-214AA (SMB J-Bend)
Cathode Band
0.086 (2.20)
0.077 (1.95)
0.155 (3.94)
0.130 (3.30)
0.096 (2.44)
0.084 (2.13)
0.180 (4.57)
0.160 (4.06)
0.012 (0.305)
0.006 (0.152)
0.060 (1.52)
0.030 (0.76)
0.008 (0.203) MAX.
0.220 (5.59)
0.205 (5.21)
Dimensions in inches and(millimeters)
FEATURES
Plastic package has Underwriters Laboratory Flammability Classification 94V-O
Glass passivated junction
500W Peak Pulse Power capability with a 10/1000us waveform,repetition
rate (duty cycle): 0.01%
Excellent clamping capability
Low incremental surge resistance
Fast response time: typically less than 1.0ns from 0 Volts to V(BR)
Ideal for data line applications
High temperature soldering guaranteed: 265°C/10 seconds,0.375"(9.5mm)
lead length,5lbs., (2.3kg) tension
Transient
Voltage
Suppressor
Diode
MECHANICAL DATA
Case JEDEC DO214AA. Molded plastic over glass passivated junction
Terminal Solder plated, solderable per MIL-STD-750, Method 2026
Polarity The band denotes TVS cathode
Standard Packaging 12mm tape(EIA STD RS-481)
Weight 0.003ounce, 0.093gram
Schemati
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25 ambient temperature unless otherwise specified.
RATING
SYMBOL
Peak Pulse Power Dissipation With a 10/1000µs waveform (Note 1,FIG.1)
P_PPM
Steady State Power Dissipation , T_L = 75 With at lead lengths 0.375"(9.5mm) P_M(AV)
Peak Power Pules Surge Current With a 10/1000µs Waveform (Note 1.FIG.3)
I_PPM
Operating junction and Storage Temperature Range
Note
1.Non-repetitive current pulse , per Fig. 3 and derated above TA = 25
T_J , T_STG
per Fig. 2 .
VALUE
Minimum
500
3
SEE
TABLE 1
-55 to +
175
UNITS
Watts
Watts
Amps
www.paceleader.tw
2