US3AC Datasheet, PDF (1/2 Pages) PACELEADER INDUSTRIAL – SURFACE MOUNT REVERSE VOLTAGE 50 TO 1000 VOLTS

US3AC thru US3MC
SURFACE MOUNT REVERSE VOLTAGE 50 TO 1000 VOLTS
ULTRA FAST RECTIFIERS FORWARD CURRENT - 3.0 AMPERES
SMC/DO-214AB
.108(2.75)
.128(3.25)
.220(5.59)
.245(6.22)
.260(6.60)
.280(7.11)
.006(.152)
.012(.305)
.079(2.00)
.103(2.62)
.030(0.76)
.050(1.27)
.002(.051)
.008(.203)
.305(7.75)
.320(8.13)
Dimensions in inches and (millimeters)
FEATURES
For surface mount applications
Low profile package
Buit-in strain relief
Easy pick and place
Ultra fast recovery times for high efficiency
Plastic package has Underwriters Laboratory
Flammability classification 94V-0
Glass passivated junction
High temperature soldering 260^oC/10seconds at terminals
Pb free product are available 99% Sn above can meet RoHS
Environment substance directive request
MECHANICAL DATA
Case JEDEC DO-214AB molded plastic
Terminals Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity Indicated by cathode band
Standard packaging 16mm tape (EIA-481)
Weight 0.007 ounce, 0.21grams
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
SYMBOL US3AC US3BC US3DC US3GC US3JC US3KC US3MC UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100 200 400 600 800 1000 Volts
Maximum RMS Voltage
VRMS
35
70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified Current @ TL =75⁰C I(AV)
50 100 200 400 600 800 1000 Volts
3.0
Amps
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
IFSM
Superimposed on Rated Load (JEDEC Method)
100
Amps
Maximum Forward Voltage at 3.0A DC
Maximum DC Reverse Current @TJ=25⁰C
at Rated DC Blocking Voltage @TJ=100⁰C
VF
1.0
1.3 1.5
1.7
Volts
10
IR
A
100
Maximum Reverse Recovery Time (NOTE 1)
TRR
Typical Junction Capacitance (NOTE 2)
CJ
Typical Thermal Resistance (NOTE 3)
R JL
Operating Temperature Rang
TJ
Storage Temperature Range
TSTG
NOTES
1. Rverse Recovery Test Condibons IF = 0.5A, IR = 1A, lRR = 0.25A
2. Measured at 1 MHz and applied reverse Voltag of 4.0VDC
3. Thermal Resistance Junction to lead
50
20
30
-55 to +150
-55 to +150
75
nS
10
pF
0_{C / W}
0_C
0_C
www.paceleader.tw
1