US3AB Datasheet, PDF (1/2 Pages) PACELEADER INDUSTRIAL – SURFACE MOUNT REVERSE VOLTAGE 50 TO 1000 VOLTS

US3AB thru US3MB
SURFACE MOUNT REVERSE VOLTAGE 50 TO 1000 VOLTS
ULTRA FAST RECTIFIERS FORWARD CURRENT - 3.0 AMPERES
.075(1.91)
.083(2.11)
SMB/DO-214AA
.130(3.30)
.155(3.94)
.083(2.13)
.096(2.44)
.030(0.76)
.050(1.27)
.160(4.06)
.185(4.70)
.006(.152)
.012(.305)
.004(.102)
.008(.203)
.200(5.08)
.220(5.59)
Dimensions in inches and (millimeters)
FEATURES
For surface mounted applications
Low profile package
Built-in strain relief
Easy pick and place
Ultrafast recovery times for high efficiency
Plastic package has Underwriters Laboratory
Flammability classification 94V-0
Glass passivated junction
High temperature soldering
260^oC/10seconds at terminals
MECHANICAL DATA
Case JEDEC DO-214AA molded plastic
Terminals Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity Indicated by cathode band
Standard Packaging 12mm tape (ELA-481)
Weight 0.21grams
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
SYMBOL US3AB US3BB US3DB US3FB US3GB US3JB US3KB US3MB UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM 50 100 200 300 400 600 800 1000 Volts
Maximum RMS Voltage
VRMS 35 70 140 210 280 420 560 700 Volts
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified Current @ TL =100⁰C I(AV)
50 100 200 300 400 600 800 1000 Volts
3.0
Amps
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method) TA=55⁰C
IFSM
150
Amps
MaximumInstantaneous Forward Voltage at 3.0A DC
VF
Maximum DC Reverse Current @TA=25⁰C
at Rated DC Blocking Voltage @TA=125⁰C
IR
1.0
1.3
1.7
Volts
10
A
250
Typical Junctionn Capacitance (NOTE 2)
CJ
50
Maximum Reverse Recovery Time (NOTE 1) TJ=25⁰C
TRR
80
75
pF
50
nS
Maximum Thermal Resistance (NOTE 3)
TJ
-55 to +150
0_C
Operating and Storage Temperature Range
TSTG
-55 to +150
0_C
NOTES
1. Rverse Recovery Test Condibons IF=5A, IR=1A, lRR=0.25A
2. Measured at 1 MHz and applied reverse Voltag of 4.0VDC
3. Measured on P.C.Board with 0.6 x0.6 (16mmX16mm) Copper Pad Area.
www.paceleader.tw
1