US2AA Datasheet, PDF (1/2 Pages) Shanghai Sunrise Electronics – SURFACE MOUNT ULTRA FAST SWITCHING RECTIFIER

US2AA thru US2MA
SURFACE MOUNT REVERSE VOLTAGE 50 TO 1000 VOLTS
ULTRA FAST RECTIFIERS FORWARD CURRENT - 2.0 AMPERES
SMA/DO-214AC
.055(1.40)
.062(1.60)
.098(2.50)
.114(2.90)
.078(2.00)
.096(2.44)
.157(4.00)
.181(4.60)
.006(.152)
.012(.305)
.030(0.76)
.060(1.52)
.004(.102)
.008(.203)
.188(4.80)
.208(5.28)
Dimensions in inches and (millimeters)
FEATURES
For surface mounted applications
Low profile package
Built-in strain relief
Easy pick and place
Ultrafast recovery times for high efficiency
Plastic package has Underwriters Laboratory
Flammability classification 94V-0
Glass passivated junction
High temperature soldering
260^oC/10seconds at terminals
MECHANICAL DATA
Case JEDEC DO-214AC molded plastic
Terminals Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity Indicated by cathode band
Standard Packaging 12mm tape (ELA-481)
Weight 0.064grams
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
SYMBOL US2AA US2BA US2DA US2FA US2GA US2JA US2KA US2MA UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM 50 100 200 300 400 600 800 1000 Volts
Maximum RMS Voltage
VRMS 35 70 140 210 280 420 560 700 Volts
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified Current @ TL =100⁰C I(AV)
50 100 200 300 400 600 800 1000 Volts
2.0
Amps
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method) TA=55⁰C
IFSM
50
Amps
MaximumInstantaneous Forward Voltage at 2.0A DC
VF
Maximum DC Reverse Current @TA=25⁰C
at Rated DC Blocking Voltage @TA=100⁰C
IR
1.0
1.3
1.7
Volts
5.0
A
100
Typical Junctionn Capacitance (NOTE 2)
CJ
Maximum Reverse Recovery Time (NOTE 1) TJ=25⁰C
TRR
Maximum Thermal Resistance (NOTE 3)
TJ
50
30
pF
50
75
nS
-55 to +150
0_C
Operating and Storage Temperature Range
TJ
-55 to +150
0_C
TSTG
NOTES
1. Rverse Recovery Test Condibons IF=5A, IR=1A, lRR=0.25A
2. Measured at 1 MHz and applied reverse Voltag of 4.0VDC
3. Measured on P.C.Board with 0.2 x0.2 (5mmX5mm) Copper Pad Area.
www.paceleader.tw
1