US1AB Datasheet, PDF (1/2 Pages) Shanghai Sunrise Electronics – SURFACE MOUNT ULTRA FAST SWITCHING RECTIFIER

US1AB thru US1MB
SURFACE MOUNT REVERSE VOLTAGE 50 TO 1000 VOLTS
ULTRA FAST RECTIFIERS FORWARD CURRENT - 1.0 AMPERES
.075(1.91)
.083(2.11)
SMB/DO-214AA
.130(3.30)
.155(3.94)
.083(2.13)
.096(2.44)
.030(0.76)
.050(1.27)
.160(4.06)
.185(4.70)
.006(.152)
.012(.305)
.004(.102)
.008(.203)
.200(5.08)
.220(5.59)
Dimensions in inches and (millimeters)
FEATURES
For surface mounted applications
Low profile package
Built-in strain relief
Easy pick and place
Ultrafast recovery times for high efficiency
Plastic package has Underwriters Laboratory
Flammability classification 94V-0
Glass passivated junction
High temperature soldering
260^oC/10seconds at terminals
MECHANICAL DATA
Case JEDEC DO-214AA molded plastic
Terminals Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity Indicated by cathode band
Standard Packaging 12mm tape (ELA-481)
Weight 0.003 ounce, 0.093grams
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
SYMBOL US1AB US1BB US1DB US1GB US1JB US1KB US1MB
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100 200 400 600 800 1000
Maximum RMS Voltage
VRMS
35
70 140 280 420 560 700
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified Current @ TL =100⁰C I(AV)
50 100 200 400 600 800 1000
1.0
UNITS
Volts
Volts
Volts
Amps
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method) TA=55⁰C
IFSM
30
Amps
MaximumInstantaneous Forward Voltage at 1.0A DC
VF
Maximum DC Reverse Current @TA=25⁰C
at Rated DC Blocking Voltage @TA=100⁰C
IR
1.0
1.3 1.5
1.7
Volts
10
A
100
Typical Junctionn Capacitance (NOTE 2)
CJ
Maximum Reverse Recovery Time (NOTE 1) TJ=25⁰C
TRR
Maximum Thermal Resistance (NOTE 3)
R JC
17
50
30
pF
75
nS
0_{C / W}
Operating and Storage Temperature Range
TJ
-50 to +150
0_C
TSTG
NOTES
1. Rverse Recovery Test Condibons IF = 5A, IR = 1A, lRR = 0.25A
2. Measured at 1 MHz and applied reverse Voltag of 4.0VDC
3. 8.3mm² (0.13mm thick) land areas.
www.paceleader.tw
1