UF1000CT Datasheet, PDF (1/2 Pages) Won-Top Electronics – 10A ULTRAFAST GLASS PASSIVATED RECTIFIER

UF1000CT thru UF1008CT
SURFACE MO^SU^UN^PT^ER^RE^FV^AE^SR^TS^RE^EV^CO^OL^VT^EA^RG^YE^RE5^C0^TT^IFO^IE8^R00 VOL TS
10A ISOLATION ULTRAFAST GLASS PASSIVATED RECTIFIER
TO-220AB
FEATURES
‧Plastic package has Underwriters Laboratory
Flammability Classification 94V-O Utilizing
Flame Retardant Epoxy Molding Compound
‧Exceeds environmental standards of MIL-S-19500/228
‧Low power loss, high efficiency
‧Low forward voltage, high current capability
‧High surge capacity
‧Ultra Fast recovery times, high voltage
‧High temperature soldering : 260^OC / 10 seconds at terminals
‧ Pb free product at available : 99% Sn above meet RoHS environment
substance directive request
MECHANICAL DATA
‧ Case:TO-220AB full molded plastic package
‧Terminals: Lead solderable per MIL-STD-202, Method 208
‧Polarity: As marked
‧Mounting Position: Any
‧Weight: 0.08 ounce, 2.24 gram
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS ^@TA^{=25°C unless otherwise specified}
Single Phase, half wave, 60Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
UF1000CT UF1001CT UF1002CT UF1003CT UF1004CT UF1006CT UF1008CT UNITS
Maximum Recurrent Peak Reverse Voltage
50
100
200
300
400
600
800
V
Maximum RMS Voltage
35
70
140
210
280
420
560
V
Maxi mum DC Blocking Voltage
50
100
200
300
400
600
800
V
Maximum Average Forward Rect if ied Current at Tc=100°C
10
A
Peak For ward Surge Current ,
8.3 ms single half sine- wave
125
A
superimposed on rated load (J EDEC method)
Maximum Instantaneous Forward Vol tage
at 5.0A per element
1.0
1.30
1.70
V
Maxi mum DC Reverse Current (Note 1) Ta=25° C
at Rated DC Block ing Vol tage Ta=125°C
10
µA
500
Maxi mum DC Reverse Cur rent (Note 1) Ta=25°C
at Rated DC Block ing Voltage
Ta=125°C
50
100
pF
Maximum Reverse Recovery Time (Note 2)
50
75
ns
Typical Thermal Resistance Note RθJC
15
°C/W
Oper ati ng and Storage Temperature Range TJ
NOTES:
-55 to +150
°C
1. Measured at 1 MHz and applied reverse voltage of 4.0 VDC.
2. Reverse Recovery Test Conditions: IF=.5A, IR=1A, Irr=.25A.
3. Thermal resistance from Junction to ambient and from junction to lead 0.375” (9.5mm) P.C.B mounted.
www.paceleader.tw
1