SMF22 Datasheet, PDF (1/2 Pages) PACELEADER INDUSTRIAL – SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

SMF22 thru SMF210
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE - 20 TO 100 VOLTS CURRENT - 2.0 AMPERES
.189(4.80)
.173(4.40)
.141(3.60)
.126(3.20)
SMF
.035(0.90) TYPICAL
1
.011(2.80)
2
.095(2.40)
.052(1.30)
.043(1.10)
.056(1.43)
.054(1.38)
0.87MAX
(2.20MAX)
.009(0.22)
.006(0.15)
FEATURES
nds0.050MIN
(1.27MIN)
minals
0.201REF
(5.1REF)
MECHANICAL DATA
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
For surface mounted applications
Low profile package
Built-in strainrelief
Metal to silicon rectifier. majority carrier conduction
Low power loss,high efficiency
High surge capacity
High current capacity
For use in low voltage high frequency inverters, free wheeling,
and polarity protection applications.
High temperaturesoldering guaranteed: 260°C /10 seco
at terminals
High temperature soldering : 260 ^OC / 10 seconds at ter
Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
Case JEDEC DO-214AC molded plastic
Terminals Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity Color band denotes cathode end
Standard Package 12mm tape (EIA STD EIA-481)
Weight 0.002 ounce, 0.064gram
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temp. unless otherwise specified
Single phase, half sine wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current
at TL (See figure 1)
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed
on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A
(Note 1)
Maximum DC Reverse Current (Note 1) Ta= 25°C
at Rated DC Blocking Voltage Ta=100°C
Maximum Thermal Resistance(Note 2)
Operating and Storage Temperature Range TJ
Storage Temperature Range
SYMBOLS SMF22 SMF23 SMF24 SMF25 SMF26 SMF28 SMF29 SMF210 UNITS
VRRM
20
30
40
50
60
80
90
100
V
VRMS
14
21
28
35
42
56
64
71
V
VDC
20
30
40
50
60
80
90
100
V
I(AV)
2.0
A
IFSM
50.0
A
VF
IR
RθJL
RθJA
TJ
TSTG
0.50
0.70
0.5
10.0
20.0
80.0
-50 to +150
-55 to +150
0.85
V
mA
°C/W
°C
°C
NOTES:
A.Pulse Test with PW =300µsec, 2% Duty Cycle.
B.Mounted on P.C. Board with 5.0mm2 (.013mm thick) copper pad areas.
www.paceleader.tw
1