SMF12 Datasheet, PDF (1/2 Pages) PACELEADER INDUSTRIAL – SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

SMF12 thru SMF110
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE - 20 TO 100 VOLTS CURRENT - 1.0 AMPERES
SMF
.189(4.80)
.173(4.40)
.141(3.60)
.126(3.20)
.035(0.90) TYPICAL
1
.011(2.80)
2
.095(2.40)
.009(0.22)
.006(0.15)
.052(1.30)
.043(1.10)
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-O
For surface mounted applications
Low profile package
Built-in strainrelief
Metal to silicon rectifier. majority carrier conduction
Low power loss,high efficiency
High surge capacity
High current capacity
For use in low voltage high frequency inverters, free wheeling,
and polarity protection applications.
High temperaturesoldering guaranteed: 260°C /10 seco
at terminals
High temperature soldering : 260 ^OC / 10 seconds at ter
Pb free product at available : 99% Sn above meet RoHS
environment substance directive request
.056(1.43)
.054(1.38)
MECHANICAL DATA
Case JEDEC DO-214AC molded plastic
Terminals Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity Color band denotes cathode end
Standard Package 12mm tape (EIA STD EIA-481)
Weight 0.002 ounce, 0.064gram
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temp. unless otherwise specified
Single phase, half sine wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
SYMBOLS SMF12 SMF13 SMF14 SMF15 SMF16 SMF18 SMF19 SMF110 UNITS
Maximum Recurrent Peak Reverse Voltage
VRRM
20
30
40
50
60
80
90
100
V
Maximum RMS Voltage
VRMS
14
21
28
35
42
56
64
71
V
Maximum DC Blocking Voltage
VDC
20
30
40
50
60
80
90
100
V
Maximum Average Forward Rectified Current
I(AV)
1.0
A
at TL (See figure 1)
Peak Forward Surge Current 8.3ms single half
sine-wave superimposed
IFSM
30.0
A
on rated load (JEDEC method)
Maximum Instantaneous Forward Voltage at 1.0A
VF
0.50
(Note 1)
0.70
0.85
V
Maximum DC Reverse Current (Note 1) Ta= 25°C
IR
at Rated DC Blocking Voltage Ta=100°C
0.5
mA
20.0
Maximum Thermal Resistance(Note 2)
RθJL
RθJA
28.0
°C/W
88.0
Operating and Storage Temperature Range TJ
TJ
-50 to +150
°C
Storage Temperature Range
TSTG
-55 to +150
°C
NOTES:
A.Pulse Test with PW =300µsec, 2% Duty Cycle.
B.Mounted on P.C. Board with 5.0mm2 (.013mm thick) copper pad areas.
www.paceleader.tw
1