SMDJ Datasheet, PDF (1/5 Pages) List of Unclassifed Manufacturers – SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR VOLTAGE-5.0 TO 170 Volts 3000 Watt Peak Pulse Power

SMDJ5.0 thru SMDJ44 0CA
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
REVERSE VOLTAGE 6.8 to 520 Volts PEAK PULSE POWER 3000 WATTS
FEATURES
Glass passivated chip
33000 W peak pulse power capability
with a 10/1000 us waveform, repetitive
rate (duty cycle):0.01 %
Low leakage
Uni and Bidirectional unit
Excellent clamping capability
Very fast response time
SMC/DO-214AB
.108(2.75)
.128(3.25)
.220(5.59)
.245(6.22)
.260(6.60)
.280(7.11)
.006(.152)
.012(.305)
.079(2.00)
.103(2.62)
.030(0.76)
.050(1.27)
.002(.051)
.008(.203)
.305(7.75)
.320(8.13)
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case Molded plastic
Epoxy UL 94V-0 rate flame retardant
Lead: Solderable per MIL-STD-750,
Method 2026
Polarity Color band denotes positive end (cathode)
except bidirectional
Mounting position: Any
RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Parameter
Peak power dissipation with a 10/1000μs waveform
Peak pulse current wih a 10/1000μs waveform
Power dissipation on infinite heatsink at T_L = 75 °C
Peak forward surge current, 8.3 ms single half sine-
wave unidirectional only⁽¹⁾
Maximum instantaneous forward voltage at 100 A
for unidirectional only⁽²⁾
Operating junction and storage temperature range
Symbol
P_PP
I_PP
P_D
I_FSM
Value
Minimum 3000
See Next Table
6.0
300
V_F
T_J, T_STG
3.5/5.0
–55 to +150
UNIT
Watts
Amps.
Watts
Amps.
Volts
°C
Note:
(1) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
(2) VF= 3.5V on SMDJ5.0 thru SMDJ90A devices and VF= 5.0V onSMDJ100 thru SMDJ440A devices.
www.paceleader.tw
1