SMBJ5.0A Datasheet, PDF(1/2 Page) Littelfuse – Silicon Avalanche Diodes - 600W Surface Mount Transient Voltage Supressors

English

English German Russian Spanish Italian Polish Chinese Japanese Korean French Portuguese	Language :

SMBJ5.0A Datasheet, PDF (1/2 Pages) Littelfuse – Silicon Avalanche Diodes - 600W Surface Mount Transient Voltage Supressors

SMBJ5.0A thru SMBJ170CA

SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR

STAND-OFF VOLTAGE 5.0 TO 170 VOLTS

600 Watt Peak Pulse Power

SMB/DO-214AA

.075(1.91)

.083(2.11)

.130(3.30)

.155(3.94)

.083(2.13)

.096(2.44)

.030(0.76)

.050(1.27)

.160(4.06)

.185(4.70)

.006(.152)

.012(.305)

.004(.102)

.008(.203)

.200(5.08)

.220(5.59)

Dimensions in inches and (millimeters)

FEATURES

For surface mount applications in order to

optimize board space

Low profile package

Built-in strain relief

Glass passivated junction

Low inductance

Excellent clamping capability

Repetition Rate (duty cycle) 0.01%

Fast response time typically less than 1.0ps

from 0 Volts to V (BR) for unidirectional types

Typical IR less than 1mA above 10V

High Temperature solderting 250oC/10seconds at terminals

Plastic package has Underwriters Laboratory

Flammability Classification 94V-0

MECHANICAL DATA

Case JEDEC DO-214A molded plastic over glass

passivated junction

Terminals Solder plated, solderable per MIL-STD-750,

Method 2026

Polarity Color band denotes positive end (cathode)

except Bidirectional

Standard Package 12mm tape (EIA STD EIA-481)

Weight 0.003 ounce, 0.093gram

DEVICES FOR BIPOLAR APPLICATION

For Bidirectional use C or CA Suffix for types SMBJ5.0 thru types SMBJ170 (e.g. SMBJ5.0C, SMBJ170CA)

Electrical characteristics apply in both directions

MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS

Ratings at 25oC ambient temperature unless otherwise specified

RATING

SYMBOL

VALUE

Peak Pulse Power Dissipation on 10/1000 S waveform

(Note 1, 2, Fig.1)

PPPM

Minimum

600

Peak Pulse Current of on 10/1000 S waveform

(Note 1, Fig.3)

SEE

IPPM

TABLE 1

Peak Forward Surge Current, 8.3ms Single Half Sine-Wave

Superimposed on Rated Load (JEDEC Method) (Note 2,3)

IFSM

100

Operating junction and Storage Temperature Range

-55 to +150

TSTG

NOTES

1. Non-repetitive current pulse, per Fig.3 and derated above TA=25oC per Fig.2.

2. Mounted on 5.0mm2 (0.03mm thick) Copper Pads to each terminal

3. 8.3ms Single Half Sine-Wave, or equivalent square wave, Duty cycle = 4 pulses per minutes maximum.

UNITS

Watts

Amps

www.paceleader.tw

▷