SK32B Datasheet, PDF (1/2 Pages) Micro Commercial Components – 3 Amp Schottky Rectifier 20 to 100 Volts

SK32B thru SK315B
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE - 20 TO 150 VOLTS CURRENT - 3.0 AMPERES
.075(1.91)
.083(2.11)
SMB/DO-214AA
.130(3.30)
.155(3.94)
.083(2.13)
.096(2.44)
.030(0.76)
.050(1.27)
.160(4.06)
.185(4.70)
.006(.152)
.012(.305)
.004(.102)
.008(.203)
.200(5.08)
.220(5.59)
Dimensions in inches and (millimeters)
FEATURES
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
For surface mount applications
Low profile package
Built-in strain relief
Metal to silicon rectifier, majority carrier conduction
Low power loss, high efficiency
High surge capability
For use in low voltage high frequency inverters, free wheeling.
and polarity protection applications
High temperature soldering 260^oC/10 seconds at terminsls
MECHANICAL DATA
Terminals Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity Color band denotes positive end (cathode)
Standard Package 12mm tape (EIA STD EIA-481)
Weight 0.003 ounce, 0.093gram
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Resistive or inductive load
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
SYMBOL SK32B SK33B SK34B SK35B SK36B SK38B SK39B SK310B SK315B UNITS
VRRM 20 30 40 50 60 80 90 100 150 Volts
VRMS 14 21 28 35 42 56 63 70 105 Volts
VDC 20 30 40 50 60 80 90 100 150 Volts
Maximum Average Forward Rectified Current at TL
(See Figure 1)
I(AV)
3.0
Amps
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method)
IFSM
Maximum Instantaneous Forward Voltage at 3.0A (Note 1) VF
Maximum DC Reverse Current (NOTE 1) TA=25⁰C
at Rated DC Blocking Voltage TA=100⁰C
IR
80
0.5
0.75
0.5
20
Amps
0.85 0.95 Volts
0.1
mA
2.0
Maximum Thermal Resistance (NOTE 2)
R JA
R JL
Operating at Storag Temprature Range TJ
TJ
Storage Temperature Range
TSTG
NOTES
1. Pulse test with pw=300 S, 2% duty cycle
2. Mounted on P.C.B with 14mm² (0.13mm thick) copper pad areas
17
55
-55 to +150
-50 to +150
0_{C / W}
0_C
0_C
www.paceleader.tw
1