SK32 Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER(VOLTAGE - 20 to 100 Volts CURRENT - 3.0 Amperes)

SK32 thru SK310
SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE - 20 TO 1000 VOLTS CURRENT - 3.0 AMPERES
SMA/DO-214AC
.055(1.40)
.062(1.60)
.098(2.50)
.114(2.90)
.078(2.00)
.096(2.44)
.157(4.00)
.181(4.60)
.006(.152)
.012(.305)
.030(0.76)
.060(1.52)
.004(.102)
.008(.203)
.188(4.80)
.208(5.28)
Dimensions in inches and (millimeters)
FEATURES
Plastic package has Underwriters Laboratory
Flamm ability Classification 94v-0
For surface mount applications
Low profile package
Built-in strain relief
Metal to silicon rectifier,majority carrier conduction
Low power loss, high efficiency
High surge capacity
High current capacity Low VF
For use in low Voltage high frequency inverters, free wheeling.
and polarity protection applications.
Pb free product at available 99% Sn above meet Rohs
Environment substance directive request
MECHANICAL DATA
Case JEDEC DO-214AC molded plastic
Terminals Solder plated, solderable per
MIL-STD-750, method 2026
Polarity Color band denotes cathode end (cathode)
Standard Package 12mm tape (EIA STD EIA-481)
Weight 0.002 ounce, 0.064gram
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Resistive or inductive load
SYMBOL SK32 SK33 SK34 SK35 SK36 SK38 SK39 SK310 UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM 20 30 40 50 60 80 90 100 Volts
Maximum RMS Voltage
VRMS
14 21 28 35 42 56 63 70
Volts
Maximum DC Blocking Voltage
VDC 20 30 40 50 60 80 90 100 Volts
Maximum Average Forward Rectified Current at TL (Figure 1) I(AV)
3.0
Amps
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
IFSM
100
Amps
Superimposed on Rated Load (JEDEC Method)
Maximum Instantaneous Forward Voltage at 3.0A
VF
0.55
0.7
0.85
Volts
Maximum DC Reverse Current (NOTE 1) TA=25⁰C
at Rated DC Blocking Voltage TA=100⁰C
IR
0.5
mA
20
Maximum Thermal Resistance (NOTE 2)
R JA
R JL
Operating Junction Temprature Range
TJ
Storage and Operating Temperature Range
TSTG
NOTES
1. Pulse test with 300 S pulse width, 1% duty cycle
2. Mounted on P.C.B Board with 8mm² (0.13mm thick) copper pad areas
20
75
-50 to +125
-50 to +150
0_{C / W}
0_C
0_C
www.paceleader.tw
1