S5AC Datasheet, PDF (1/2 Pages) Diodes Incorporated – 5.0A FAST RECOVERY GLASS PASSIVATED RECTIFIER

S5AC thru S5MC
SURFACE MOUNT GLASS PASSIVATED RECTIFIER
VOLTAGE - 50 TO 1000 VOLTS CURRENT - 5.0 AMPERES
SMC/DO-214AB
.108(2.75)
.128(3.25)
.220(5.59)
.245(6.22)
.260(6.60)
.280(7.11)
.006(.152)
.012(.305)
.079(2.00)
.103(2.62)
.030(0.76)
.050(1.27)
.002(.051)
.008(.203)
.305(7.75)
.320(8.13)
Dimensions in inches and (millimeters)
FEATURES
Glass Passivated Die Construction
Low Forward Voltage Drop and High Current Capability
Surge Overload Rating to 100A Peak
Ldeally Suited for Automated Assembly
MECHANICAL DATA
Case Molded plastic
Case Molded UL flammability rating
classification 94V-0
Moisture sensitivity Level 1 per J-STD-020A
Terminals Solder plated Terminal-solderable per
MIL-SRD-202, Method 208
Polarity Cathode band or cathode notch
Weight 0.21grams (approx)
Ordering Information See Page 2
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Single phase, half wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
SYMBOL S5AC
Maximum Repetitive Peak Reverse Voltage
VRRM
50
Maximum RMS Voltage
VRMS
35
Maximum DC Blocking Voltage
VDC
50
Average Rectified Output Current at TT =75⁰C
I(AV)
S5BC
100
70
100
S5DC S5GC
200 400
140 280
200 400
5.0
S5JC
600
420
600
S5KC S5MC
800 1000
560 700
800 1000
UNITS
Volts
Volts
Volts
Amps
Non-Repetitive Peak Forward Surge Current 8.3ms Single
Half Sine-Wave Superimposed on Rated Load (JEDEC Method) ^IFSM
100
Amps
Forward Voltage @IF= 5.0A
VFM
1.15
Volts
Maximum DC Reverse Current (NOTE 1) TA=25⁰C
10
at Rated DC Blocking Voltage TA=125⁰C
IR
250
A
Typical Thermal Resistance, Junction to Terminal (NOTE 2)
CJ
Maximum Thermal Resistance (NOTE 2)
R JT
40
pF
10
0_{C / W}
Operating and Storage Temperature Range
TJ
-65 to +150
0_C
TSTG
NOTES
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts
2. Thermal Resistance Junction to Terminal, unit mounted on PC board with 5.0mm² (0.013mm thick) copper pads as Heat Sink.
www.paceleader.tw
1