S3AC Datasheet, PDF (1/2 Pages) PACELEADER INDUSTRIAL – SURFACE MOUNT STANDARD RECOVERY RECTIFIER

S3AC thru S3MC
SURFACE MOUNT STANDARD RECOVERY RECTIFIER
VOLTAGE - 50 TO 1000 VOLTS CURRENT - 3.0 AMPERES
SMC/DO-214AB
.108(2.75)
.128(3.25)
.220(5.59)
.245(6.22)
.260(6.60)
.280(7.11)
.006(.152)
.012(.305)
.079(2.00)
.103(2.62)
.030(0.76)
.050(1.27)
.002(.051)
.008(.203)
.305(7.75)
.320(8.13)
Dimensions in inches and (millimeters)
FEATURES
For surface mount applications
Glass passivated junction
Low profile package
Built-in strain relief
Easy pick and place
Low forward voltage drop
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
High temperature soldering
260^oC/10 seconds at terminsls
MECHANICAL DATA
Case JEDEC DO-214AB molded plastic
Terminals Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity Indicated by cathode band
Standard Package 12mm tape (EIA STD EIA-481)
Weight 0.007 ounce, 0.21gram
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current at TL =75⁰C
SYMBOL S3AC
VRRM
50
VRMS
35
VDC
50
I(AV)
S3BC
100
70
100
S3DC S3GC
200 400
140 280
200 400
3.0
S3JC
600
420
600
S3KC S3MC
800 1000
560 700
800 1000
UNITS
Volts
Volts
Volts
Amps
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method)
IFSM
100
Amps
Maximum Instantaneous Forward Voltage at 3.0A
VF
Maximum DC Reverse Current (NOTE 1)TA=25⁰C
at Rated DC Blocking Voltage TA=125⁰C
IR
1.2
Volts
5
A
250
Typical Reverse Recovery Time (NOTE 1)
TRR
2.5
nS
Maximum Thermal Resistance (NOTE 2)
R JA
R JL
13
0_{C / W}
47
Typical Junction Capacitance (NOTE 3)
CJ
53
pF
Operating and Storage Temperature Range
TJ
-55 to +150
0_C
TSTG
NOTES
1. Reverse Recovery Test Conditions IF=0.5A, IR=1.0A, IRR=0.25A.
2. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts
3. 8.0mm² (0.13mm thick) land areas.
www.paceleader.tw
1