S2AB Datasheet, PDF (1/2 Pages) PACELEADER INDUSTRIAL – SURFACE MOUNT STANDARD RECOVERY RECTIFIER

S2AB thru S2MB
SURFACE MOUNT STANDARD RECOVERY RECTIFIER
VOLTAGE - 50 TO 1000 VOLTS CURRENT - 2.0 AMPERES
.075(1.91)
.083(2.11)
SMB/DO-214AA
.130(3.30)
.155(3.94)
.083(2.13)
.096(2.44)
.030(0.76)
.050(1.27)
.160(4.06)
.185(4.70)
.006(.152)
.012(.305)
.004(.102)
.008(.203)
.200(5.08)
.220(5.59)
Dimensions in inches and (millimeters)
FEATURES
For surface mount applications
Glass passivated junction
Low profile package
Built-in strain relief
Easy pick and place
Low forward voltage drop
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
High temperature soldering
250^oC/10 seconds at terminsls
MECHANICAL DATA
Case JEDEC DO-214AA molded plastic
Terminals Solder plated, solderable per
MIL-STD-202, Method 208
Polarity Color band denotes cathode end
Standard Package 12mm tape (EIA STD EIA-481)
Weight 0.003 ounce, 0.093gram
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
SYMBOL S2AB
Maximum Repetitive Peak Reverse Voltage
VRRM
50
Maximum RMS Voltage
VRMS
35
Maximum DC Blocking Voltage
VDC
50
Maximum Average Forward Rectified Current at TL =100⁰C I(AV)
Peak Forward Surge Current 8.3mm Single Half Sine-Wave
IFSM
Superimposed on Rated Load (JEDEC Method)
Maximum Instantaneous Forward Voltage at 2.0A
VF
Maximum DC Reverse Current TA=25⁰C
at Rated DC Blocking Voltage TA=125⁰C
IR
Typical Junction Capacitance (NOTE 1)
CJ
Maximum Thermal Resistance (NOTE 2)
R JA
R JL
S2BB
100
70
100
S2DB
200
140
200
S2GB
400
280
400
2.0
50
1.1
5
125
30
53
16
S2JB
600
420
600
S2KB
800
560
800
S2MB
1000
700
1000
UNITS
Volts
Volts
Volts
Amps
Amps
Volts
A
pF
0_{C / W}
Operating and Storage Temperature Range
TJ
-55 to +150
0_C
TSTG
NOTES
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts
2. The thermal resistance from junction to ambient and junction to lead P.C.B. mounted on 0.27x0.27 (7.0x7.0mm) copper pad areas
www.paceleader.tw
1