S2A Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – SURFACE MOUNT RECTIFIER(VOLTAGE - 50 to 1000 Volts CURRENT - 2.0 Amperes)

S2A thru S2M
SURFACE MOUNT STANDARD RECOVERY RECTIFIER
VOLTAGE - 50 TO 1000 VOLTS CURRENT - 2.0 AMPERES
SMA/DO-214AC
.055(1.40)
.062(1.60)
.098(2.50)
.114(2.90)
.078(2.00)
.096(2.44)
.157(4.00)
.181(4.60)
.006(.152)
.012(.305)
.030(0.76)
.060(1.52)
.004(.102)
.008(.203)
.188(4.80)
.208(5.28)
Dimensions in inches and (millimeters)
FEATURES
For surface mount applications
Glass passivated junction
Low profile package
Built-in strain relief
Easy pick and place
Low forward voltage drop
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
High temperature soldering
250^oC/10 seconds at terminsls
MECHANICAL DATA
Case JEDEC DO-214AC molded plastic
Terminals Solder plated, solderable per
MIL-STD-202, Method 208
Polarity Color band denotes cathode end
Standard Package 12mm tape (EIA STD EIA-481)
Weight 0.002 ounce, 0.064gram
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
SYMBOL S2A S2B S2D S2G S2J S2K S2M UNITS
Maximum Repetitive Peak Reverse Voltage
VRRM
50
100 200 400 600 800 1000 Volts
Maximum RMS Voltage
VRMS
35
70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage
VDC
Maximum Average Forward Rectified Current at TL =100⁰C I(AV)
50 100 200 400 600 800 1000 Volts
2.0
Amps
Peak Forward Surge Current 8.3mm Single Half Sine-Wave
IFSM
50
Amps
Superimposed on Rated Load (JEDEC Method)
Maximum Instantaneous Forward Voltage at 2.0A
VF
Maximum DC Reverse Current TA=25⁰C
at Rated DC Blocking Voltage TA=125⁰C
IR
1.1
Volts
5
A
125
Typical Junction Capacitance (NOTE 1)
CJ
30
pF
Maximum Thermal Resistance (NOTE 2)
R JA
R JL
53
0_{C / W}
16
Operating and Storage Temperature Range
TJ
-55 to +150
0_C
TSTG
NOTES
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts
2. The thermal resistance from junction to ambient and junction to lead P.C.B. mounted on 0.27x0.27 (7.0x7.0mm) copper pad areas
www.paceleader.tw
1