S1AB Datasheet, PDF (1/2 Pages) Shanghai Sunrise Electronics – SURFACE MOUNT GLASS PASSIVATED RECTIFIER

S1AB thru S1MB
SURFACE MOUNT STANDARD RECOVERY RECTIFIER
VOLTAGE - 50 TO 1000 VOLTS CURRENT - 1.0 AMPERES
SMB/DO-214AA
FEATURES
For surface mount applications
Glass passivated junction
Low profile package
High current capability
Easy pick and place
High surge current capability
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
High temperature soldering
250^oC/10 seconds at terminsls
.075(1.91)
.083(2.11)
.130(3.30)
.155(3.94)
.160(4.06)
.185(4.70)
.006(.152)
.012(.305)
.083(2.13)
.096(2.44)
.030(0.76)
.050(1.27)
.002(.051)
.008(.203)
.200(5.08)
.220(5.59)
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case JEDEC DO-214AA molded plastic
Terminals Pure tin plated, lead free
Polarity Indicated by cathode band
Package 12mm tape EIA STD RS-481
Weight 0.093gram
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
SYMBOL S1AB
Maximum Repetitive Peak Reverse Voltage
VRRM
50
Maximum RMS Voltage
VRMS
35
Maximum DC Blocking Voltage
VDC
50
Maximum Average Forward Rectified Current at TL =110⁰C I(AV)
S1BB
100
70
100
Peak Forward Surge Current 8.3mm Single Half Sine-Wave
IFSM
Superimposed on Rated Load (JEDEC Method)
Maximum Instantaneous Forward Voltage at 1.0A
VF
Maximum DC Reverse Current TA=25⁰C
at Rated DC Blocking Voltage TA=125⁰C
IR
Typical Junction Capacitance (NOTE 1)
CJ
Maximum Thermal Resistance (NOTE 2)
R JL
Operating and Storage Temperature Range
TJ
TSTG
NOTES
1. Measured at 1.0 MHz and applied reverse voltage of 4.0 volts
2. Measured on P.C.B. Board with 0.27 x0.27 (7.0x7.0mm) copper pad areas
S1DB
200
140
200
S1GB
400
280
400
1.0
S1JB
600
420
600
30
1.1
5
50
12
30
-55 to +150
S1KB
800
560
800
S1MB
1000
700
1000
UNITS
Volts
Volts
Volts
Amps
Amps
Volts
A
pF
0_{C / W}
0_C
www.paceleader.tw
1