RS3AC Datasheet, PDF (1/2 Pages) PACELEADER INDUSTRIAL – FAST SWITCHING SURFACE MOUNT RECTIFIER

RS3AC thru RS3MC
FAST SWITCHING SURFACE MOUNT RECTIFIER
VOLTAGE - 50 TO 1000 VOLTS CURRENT - 3.0 AMPERES
SMC/DO-214AB
.108(2.75)
.128(3.25)
.220(5.59)
.245(6.22)
.260(6.60)
.280(7.11)
.006(.152)
.012(.305)
.079(2.00)
.103(2.62)
.030(0.76)
.050(1.27)
.002(.051)
.008(.203)
.305(7.75)
.320(8.13)
Dimensions in inches and (millimeters)
FEATURES
For surface mount applications
Low profile package
Buit-in strain relief
Easy pick and place
Fast Recovery times for high efficiency
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
Glass passivated junction
High temperature soldering 260^oC/10seconds at terminals
Pb free product are available 99% Sn above can meet RoHS
environment substance directive request
MECHANICAL DATA
Case JEDEC DO-214AB molded plastic
Terminals : Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity Indicated by cathode band
Standard packaging 12mm tape (EIA-481)
Weight 0.007 ounce, 0.021grams
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current @ TL =90⁰C
SYMBOL RS3AC RS3BC RS3DC RS3GC RS3JC RS3KC RS3MC
VRRM
50
100 200 400 600 800 1000
VRMS
35
70 140 280 420 560 700
VDC
50 100 200 400 600 800 1000
I(AV)
3.0
UNITS
Volts
Volts
Volts
Amps
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method)
IFSM
50
Amps
Maximum Instantaneoue Forward Voltage at 3.0A
VF
Maximum DC Reverse Current @TA=25⁰C
at Rated DC Blocking Voltage @TA=125⁰C
IR
Maximum Reverse Recovery Time (NOTE 1) TJ=25⁰C
TRR
Typical Junction Capacitance (NOTE 2)
CJ
Maximum Thermal Resistance (NOTE 3)
R JL
1.3
Volts
10.0
A
300
150
250
500
nS
60
pF
15
0_{C / W}
Operating and Storage Temperature Range
TJ
-55 to +150
0_C
TSTG
NOTES
1. Rverse Recovery Test Condibons IF = 0.5A, IR = 1.0A, l RR= 0.25A
2. Measured at 1 MHz and applied VR = 4.0 volts
3. 8.0mm² (.013mm thick) land areas
www.paceleader.tw
1