RS2A Datasheet, PDF (1/2 Pages) Shanghai Sunrise Electronics – SURFACE MOUNT FAST SWITCHING RECTIFIER

RS2A thru RS2M
SURFACE MOUNT FAST RECOVERY RECTIFIER
VOLTAGE - 50 TO 1000 VOLTS CURRENT - 2.0 AMPERES
SMA/DO-214AC
.055(1.40)
.062(1.60)
.098(2.50)
.114(2.90)
.078(2.00)
.096(2.44)
.157(4.00)
.181(4.60)
.006(.152)
.012(.305)
.030(0.76)
.060(1.52)
.004(.102)
.008(.203)
.188(4.80)
.208(5.28)
Dimensions in inches and (millimeters)
FEATURES
For surface mount applications
Glass passivated junction chip
Buit-in strain relief, ideal for automated placement
Plastic material used carries Underwriters
Laboratory Classification 94V-0
Fast switching for high efficiency
High temperature soldering 260^oC/10seconds at terminals
MECHANICAL DATA
Case JEDEC DO-214AC molded plastic
Terminals Pure tin plated, Lead free.
Polarity Indicated by cathode band
Standard packaging 12mm tape EIA STD RS-481
Weight 0.064grams
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Single phase, half wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
SYMBOL RS2A
Maximum Repetitive Peak Reverse Voltage
VRRM
50
Maximum RMS Voltage
VRMS
35
Maximum DC Blocking Voltage
VDC
50
Maximum Average Forward Rectified Current @ TL =100⁰C I(AV)
RS2B
100
70
100
RS2D
200
140
200
RS2G
400
280
400
2.0
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method)
IFSM
50
Maximum Instantaneoue Forward Voltage at 2.0A
VF
Maximum DC Reverse Current @TA=25⁰C
at Rated DC Blocking Voltage @TA=125⁰C
IR
Maximum Reverse Recovery Time (NOTE 1) TJ=25⁰C
TRR
Typical Junction Capacitance (NOTE 2)
CJ
1.3
5.0
200
150
50
Maximum Thermal Resistance (NOTE 3)
R JA
55
R JL
18
RS2J
600
420
600
250
RS2K
800
560
800
RS2M
1000
700
1000
500
UNITS
Volts
Volts
Volts
Amps
Amps
Volts
A
nS
pF
0_{C / W}
Operating and Storage Temperature Range
TJ
-55 to +150
0_C
TSTG
NOTES
1. Rverse Recovery Test Condibons IF = 0.5A, IR = 1.0A, lRR = 0.25A
2. Measured at 1 MHz and applied reverse Voltag of 4.0VDC
3. Thermal Resistance from Junction to Ambient and Junction to Lead Mounted on P.C.B. with 0.2"X0.2" (0.5X0.5mm) copper Pad Areas
www.paceleader.tw
1