RGL34A Datasheet, PDF (1/2 Pages) Dc Components – TECHNICAL SPECIFICATIONS OF SURFACE MOUNT FAST RECOVERY RECTIFIER

RGL34A thru RGL34M
SURFACE MOUNT GLASS PASSIVATED JUNCTION FAST SWITCHING RECTIFIERS
FEATURES
Ldeal for surface mounted applications
Easy pick and place
Low leakage current
Glass passivated chips
Metallurgically bonded construction
High temperature soldering guaranteed
250^oC/10 seconds/.375 , (9.5mm) lead lengths
DO-213AA / MINI MELF
SOLDERABLE ENDS
CATHODE BAND
D1= 0.066(1.676)
0.060(1.524)
D2
0.022(0.559)
0.016(0.406)
0.145(3.683)
0.131(3.327)
D2=D1 +0
-0.008(0.20)
Dimension in inches (millimeters )
MECHANICAL DATA
Case Molded plastic use UL94V-0 recoqnized
flame retardant epoxy
Terminals Plated terminals, solderable per
MIL-STD-202, Method208
Polarity Red Color band on body denotes cathode
Mounting position Any
Weight 0.036gram
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temp. unless otherwise specified
Single phase, half sine wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
Maximum Current Peak Reverse Voltage
RGL
SYMBOL _34A
VRRM
50
Maximum RMS Voltage
VRMS
35
Maximum DC Blocking Voltage
VDC
50
Maximum Average Forward Rectified Current TT=60⁰C
I(AV)
RGL
34B
100
RGL
34D
200
RGL
34G
400
RGL
34J
600
70 140 280 420
100 200 400 600
0.5
Peak Forward Surge Current Single Sine-Wave on Rated
Load (JEDEC Method)
IFSM
30
Maximum Instantaneous Forward Voltage Drop at 0.5A DC VF
1.3
Maximum DC Reverse Current @TA=25⁰C
5.0
at Rated DC Blocking Voltage TA=125⁰C
IR
100
Maximum Reverse Recovery Time
TRR
Typical Junction Capacitance
CJ
Operating Junction Temperature Range
TJ
Storage Temperature Range
TSTG
NOTES
1. Reverse Recovery Test Conditions IF=0.5A, IR=1.0A, IRR=0.25A
2. Measured at 1 MHz and Applied Reverse Voltage of 4.0 Volts D.C
150
250
15
-65 to +150
-65 to +150
RGL
34K
800
RGL
34M
1000
UNITS
Volts
560 700 Volts
800 1000 Volts
Amps
Amps
Volts
A
500
nS
pF
0_C
0_C
www.paceleader.tw
1