MB105F Datasheet, PDF (1/2 Pages) PACELEADER INDUSTRIAL – Miniature Glass Passivated Single-Phase Surface Mount Flat Bridge Rectifier

MB105 F ^thru MB110F
Miniature Glass Passivated Single-Phase Surface Mount Flat Bridge Rectifier
VOLTAGE - 50 TO 1000 VOLTS CURRENT - 1.0 AMPERES
Major Ratings and Characteristics
I_F(AV)
1.0A
V_RRM
50-1000V
I_FSM
35 A
I_R
5.0 μA
V_F
T_j max.
1.0V
150 °C
FEATURES
● Low profile space
● Ideal for automated placement
● Glass passivated chip junction
● Low forward voltage drop
● Low leakage current
● High forward surge capability
● High temperature soldering：
260℃/10 seconds at terminals
● Component in accordance to
RoHS 2002/95/1 and WEEE 2002/96/EC
MECHANICAL DATA
● Case: MBF Molded plastic
over glass passivated chip
● Terminals: Solder plated, solderable per
J-STD-002B and JESD22-B102D
● Polarity: Polarity symbols marked on body
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
(T_A = 25 °C unless otherwise noted)
Symbol MB105F MB11F MB12F MB14F MB16F MB18F MB110F UNIT
Maximum repetitive peak reverse voltage
V_RRM 50 100 200 400 600 800 1000 V
Maximum RMS voltage
V_RMS 35 70 140 280 420 560 700 V
Maximum DC blocking voltage
V_DC 50 100 200 400 600 800 1000 V
Maximum average forward output rectified current
at T_A=30℃
I_F(AV)
1.0
A
Peak forward surge current 8.3 ms single half sine-
wave superimposed on rated load(JEDEC Method)
I_FSM
35
A
Maximum instantaneous forwad voltage drop
per leg at 1.0A
V_F
Maximum DC reverse current at TA = 25 ℃
rated DC blocking voltage per leg T_A = 125℃
I_R
Typical junction capacitance per leg at 4.0 V ,1MHz C_J
Thermal resistance per leg (NOTE 1)
R_θJA
R_θJL
Operating junction and storage temperature range T_J, T_STG
NOTE1: Units mounted on P.C.B. with 0.05×0.05″(1.3×1.3mm) pads
1.1
5.0
100
13
70
20
–55 to +150
V
μA
pF
℃/ W
℃
www.paceleader.tw
1