DF2005S Datasheet, PDF (1/2 Pages) HY ELECTRONIC CORP. – SURFACE MOUNT GLASS PASSIVATED BRIDEG RECTIFIERS

DF2005S thru DF210S
SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIERS SINGLE-PHASE GLASS BRIDGE
REVERSE VOLTAGE - 50 TO 1000 VOLTS FORWARD CURRENT - 2.0 AMPERES
FEATURES
Rating to 1000V PRV
Ldeal for printed circuit board
Low forward voltage drop,high current capability
Reliable low cost construction utilizing molded
Plastic technique results in inexpensive product
Lead in plated copper
The plastic material has UL flammability
Classification 94V-0
MECHANICAL DATA
Polarity As marked on body
Weight 0.02 ounce, 0.38gram
Mounting position Any
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temp. unless otherwise specified
Single phase, half sine wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
Maximum Recurrent Peak Reverse Voltage
VRRM
DF
2005S
50
DF
201S
100
DF
202S
200
DF
204S
400
DF
206S
600
DF
208S
800
DF
210S
1000
UNITS
Volts
Maximum RMS Bridge input Voltage
VRMS
35
70 140 280 420 560 700 Volts
Maximum DC Blocking Voltage
VDC
50 100 200 400 600 800 1000 Volts
Maximum Average Forward Rectified Current @ TA=40⁰C
I ^(AV)
2.0
Amps
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method)
IFSM
60
Amps
Maximum Forward Voltage at 2.0A DC
VF
1.1
Volts
Maximum DC Reverse @TJ=25⁰C
10
at rated DC Blocking Voltage @TJ=125⁰C
IR
500
A
I² t Rating for fusing (t<8.3ms)
I² t
10.4
A²S
Typical Junction capacitance per element (Note 1)
CJ
Typical Thermal resistance (Note 2)
R JA
25
pF
40
0_{C / W}
Operating Temperature Range
TJ
-55 to +150
0_C
Storage Temperature Range
TSTG
-55 to +150
0_C
NOTES
1. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0 Volts DC
2. Thermal Resestance From Junction to Ambient and from junction to lead mounted on P.C.B with 0.5 x 0.5 (13x13mm) copper pads.
www.paceleader.tw
1