DF15005S Datasheet, PDF (1/2 Pages) Diodes Incorporated – 1.5A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER

DF15005S thru DF1510S
SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIERS SINGLE-PHASE GLASS BRIDGE
REVERSE VOLTAGE - 50 TO 1000 VOLTS FORWARD CURRENT - 1.5 AMPERES
FEATURES
Rating to 1000V PRV
Ldeal for printed circuit board
Reliable low cost construction utilizing molded
Plastic technique results in inexpensive product
Lead in plated copper
The plastic material has UL flammability
Classification 94V-0
MECHANICAL DATA
Polarity As marked on body
Weight 0.02 ounce, 0.38gram
Mounting position Any
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temp. unless otherwise specified
Single phase, half sine wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
Maximum Recurrent Peak Reverse Voltage
VRRM
DF
15005S
50
Maximum RMS Bridge input Voltage
VRMS
35
Maximum DC Blocking Voltage
VDC
50
Maximum Average Forward Rectified Current @ TA=40⁰C
V(AV)
DF
1501S
100
70
100
DF
1502S
200
140
200
DF
1504S
400
280
400
1.5
DF
1506S
600
420
600
DF
1508S
800
560
800
DF
1510S
1000
700
1000
UNITS
Volts
Volts
Volts
Amps
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load (JEDEC Method)
IFSM
50
Amps
Maximum DC Forward Voltage at ADC
VF
1.1
Volts
Maximum DC Reverse @TJ=25⁰C
10
at rated DC Blocking Voltage @TJ=125⁰C
IR
500
A
I² t Rating for fusing (t<8.3ms)
I² t
10.4
A²S
Typical Junction capacitance per element (Note 1)
CJ
Typical Thermal resistance (Note 2)
R JC
25
pF
40
0_{C / W}
Operating Temperature Range
TJ
-55 to +150
0_C
Storage Temperature Range
TSTG
-55 to +150
0_C
NOTES
1. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0 Volts DC
2. Thermal Resestance From Junction to Ambient and from junction to lead mounted on P.C.B with 0.5 x 0.5 (13x13mm) copper pads.
www.paceleader.tw
1