DF005S Datasheet, PDF (1/2 Pages) Won-Top Electronics – 1.0A SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER

DF005S thru DF10S
SINGLE-PHASE GLASS PASSIVATED SMD BRIDGE RECTIFIERS
VOLTAGE - 50 TO 1000 VOLTS CURRENT - 1.0 AMPERES
8.5
8.1
FEATURES
Glass passivated JUNCTION
Surge overload rating to 50 amperes peak
Ldeal for printed circuit board applications
Low Forward Voltage drop
Reliable low cost construction utilizing molded
Plastic technique
Plastic PACKAGE HAS underwriters Laboratory
Flammability Classification 94V-0
High temperature soldering guaranteed
260^oC/10seconds at 5lbs. (2.3kg) tension
MECHANICAL DATA
Case Molded plastic body over passivated junction
Terminals Plated lead, solderable per
MIL-STD-202, Method 208
Polarity Polarity symbols marked on body
Weight 0.04 ounce, 1.0gram
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temp. unless otherwise specified
Single phase, half sine wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
Maximum Repetitive Peak Reverse Voltage
Maximum RMS Voltage
Maximum DC Blocking Voltage
Maximum Average Forward Rectified Current @ TA=40⁰C
SYMBOL DF005S DF01S DF02S DF04S DF06S DF08S DF10S
VRRM
50
100 200 400 600 800 1000
VRMS
35
70 140 280 420 560 700
VDC
50 100 200 400 600 800 1000
V(AV)
1.0
UNITS
Volts
Volts
Volts
Amps
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load
IFSM
50
Amps
Maximum Instantaneous Forward Voltage Drop per Bridge
VF
1.1
Element at 1.0A
Maximum DC Reverse @TA=25⁰C
at rated DC Blocking Voltage @TA=125⁰C
IR
Rating for fusing (t<8.3ms)
I² t
Typical Junction capacitance (Note 1)
CJ
Typical Thermal resistance (Note 2)
R JC
10
500
10.4
25
74
Operating and Storage Temperature Range
TJ
TSTG
-55 to +150
NOTES
1. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0 Volts
2. Thermal Resestance From Junction to Ambient mounted on P.C.B with 0.5 x 0.5 (13x13mm) copper pads
Volts
A
A²S
pF
0_{C / W}
0_C
www.paceleader.tw
1