B1S Datasheet, PDF (1/2 Pages) Pan Jit International Inc. – MINI SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER(VOLTAGE - 100 to 1000 Volts CURRENT - 0.5 Amperes)

B1S thru B10S
MINI SURFACE MOUNT GLASS PASSIVATED RECTIFIERS
VOLTAGE - 100 TO 1000 VOLTS CURRENT - 0.5 AMPERES
FEATURES
Plastic material used carries Underwiters
Laboratory recognition 94V-0
Low leakage
Surge overload rating-30 amperes peak
Ldeal for printed circuit board
Exceeds environmental standards of MMIL-S-19500
MECHANICAL DATA
Case Reliable low cost construction utilizing molded
plastic technique results in inexpensive product
Terminals Lead solderable per MIL-STD-202, Method 208
Polarity Polarity symbols molded or marking on body.
Mounting position Any
Weight 0.008 ounce, 0.22gram
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temp. unless otherwise specified
Single phase, half sine wave, 60Hz, resistive or inductive load
For capacitive load, derate current by 20%
Maximum Recurrent Peak Reverse Voltage
Maximum RMS Bridge input Voltage
Maximum DC Blocking Voltage
B1S
B2S
100
200
70
140
100
200
Maximum Average Forward on glass-epoxy P.C.B (Note 1)
Current TA=30⁰C on aluminum substrate (Note 3)
B4S
B6S
400
600
280
420
400
600
0.5
0.8
B8S
B10S UNITS
800
1000
Volts
560
700
Volts
800
1000
Volts
Amps
Peak Forward Surge Current, 8.3ms Single Half Sine-Wave
Superimposed on Rated Load
30
Amps
I² t Rating fusing (t<8.35ms)
5
A²t
Maximum Forward Voltage Drop per Bridge Element at 0.5A
1
V
Maximum Reverse Current at Rated TJ=25⁰C
DC Blocking Voltage per element TJ=125⁰C
5
A
Typical Junction capacitance per leg (Note 1) CJ
Typical Thermal resistance per leg (Note 2) R JA
Operating Temperature Range TJ
Storage Temperature Range TA
25
85
-55 to +150
-55 to +150
pF
0_{C / W}
0_C
0_C
NOTES
1. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0 Volts
2. Thermal Resestance From Junction to Ambient and from junction to lead mounted on P.C.B with 0.05 x 0.05 (13x13mm) copper pads.
3. On alum substrate P.C.B with an rea of 0.8x0.8x0.25 (20x20x6.4mm) mounte on 0.05x0.05 (13x13mm) solder pad.
www.paceleader.tw
1