B120L Datasheet, PDF (1/2 Pages) PACELEADER INDUSTRIAL – LO VF SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER

B120L thru B140L
LO VF SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER
VOLTAGE - 20 TO 40 VOLTS CURRENT - 1.0 AMPERES
SMA/DO-214AC
.055(1.40)
.062(1.60)
.098(2.50)
.114(2.90)
.078(2.00)
.096(2.44)
.157(4.00)
.181(4.60)
.006(.152)
.012(.305)
.030(0.76)
.060(1.52)
.004(.102)
.008(.203)
.188(4.80)
.208(5.28)
Dimensions in inches and (millimeters)
FEATURES
MECHANICAL DATA
Plastic package has Underwriters Laboratory
Flammability Classification 94V-0
For surface mount applications
Low profile package
Built-in strain relief
Metal to silicon rectifier, majority carrier conduction
Low power loss, high efficiency
Easy pick and place
High curren capability, low VF
High surge capacity
For use in low voltage gigh frequency inverters,
Free wheeling, and protection applications
High temperature soldering guaranteed
High temperature soldering
260^oC/10 seconds at terminsls
Pb free product at available 99% Sn above meet RoHs
Environment substance directive request
Case JEDEC DO-214AC molded plastic
Terminals Solder plated, solderable per
MIL-STD-750, Method 2026
Polarity Color band denotes cathode
Standard Package 12mm tape (EIA STD EIA-481)
Weight 0.002 ounce, 0.064gram
MAXIMUM RATIXGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Resistive or inductive load
SYMBOL
B120L
Maximum Repetitive Peak Reverse Voltage
VRRM
20
Maximum RMS Voltage
VRMS
14
Maximum DC Blocking Voltage
VDC
20
B130L
30
21
30
Maximum Average Forward Rectified Current at TL
(see Figure 1)
I(AV)
1.0
B140L
40
28
40
UNITS
Volts
Volts
Volts
Amps
Peak Forward Surge Current 8.3ms Single Half Sine-Wave
IFSM
Superimposed on Rated Load (JEDEC Method)
Maximum Instantaneous Forward Voltage at 1.0A (Note 1) VF
Maximum DC Reverse Current (NOTE 1) TA=25⁰C (Note 1)
at Rated DC Blocking Voltage TA=100⁰C
IR
30
0.38
0.5
20
Amps
0.4
Volts
mA
Maximum Thermal Resistance (NOTE 2)
R JL
R JA
Operating Junction Capacitance Range
TJ
Storage and Operating Temperature Range
TSTG
NOTES
1. Pulse test with pw=300 sec, 1% duty cycle
2. Measured on P.C.B WITH 5.0mm² (0.13mm thick ) copper pad areas
28
88
-50 to +150
-50 to +150
0_{C / W}
0_C
0_C
www.paceleader.tw
1