5.0SMDJ Datasheet, PDF (1/4 Pages) UN Semiconducctor INC – Surface Mount Transient Voltage Suppressors

5.0SMDJ SERIES
SURFACE MOUNT TRANSIENT VOLTAGE SUPPRESSOR
REVERSE VOLTAGE 6.8 to 520 Volts PEAK PULSE POWER 5000 WATTS
FEATURES
Glass passivated chip
55000 W peak pulse power capability
with a 10/1000 us waveform, repetitive
rate (duty cycle):0.01 %
Low leakage
Uni and Bidirectional unit
Excellent clamping capability
Very fast response time
SMC/DO-214AB
.108(2.75)
.128(3.25)
.220(5.59)
.245(6.22)
.260(6.60)
.280(7.11)
.006(.152)
.012(.305)
.079(2.00)
.103(2.62)
.030(0.76)
.050(1.27)
.002(.051)
.008(.203)
.305(7.75)
.320(8.13)
Dimensions in inches and (millimeters)
MECHANICAL DATA
Case Molded plastic
Epoxy UL 94V-0 rate flame retardant
Lead: Solderable per MIL-STD-750,
Method 2026
Polarity Color band denotes positive end (cathode)
except bidirectional
Mounting position: Any
RATINGS AND ELECTRICAL CHARACTERISTICS
Ratings at 25^oC ambient temperature unless otherwise specified
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%
Parameter
Symbol
Value
UNIT
Peak power dissipation with a 10/1000μs waveform
Peak pulse current wih a 10/1000μs waveform
Power dissipation on infinite heatsink at T_L = 75 °C
P_PP
Minimum 5000
Watts
I_PP
See Next Table Amps.
P_D
6.5
Watts
Peak forward surge current, 8.3 ms single half sine-
wave unidirectional only⁽¹⁾
I_FSM
300
Amps.
Operating junction and storage temperature range
T_J, T_STG
–55 to +150
°C
Note:
(1) Measured on 8.3 ms single half sine-wave or equivalent square wave, duty cycle = 4 pulses per minute maximum.
www.paceleader.tw
1