PLBT3528-WCNW Datasheet, PDF (6/13 Pages) P-tec Corporation – 3.5 x 2.8 x 1.9mm SMD LED

IR Reflow Soldering Profile
• Lead Free Solder
Notes:
1. We recommend reflow temp of 240°C (+/-5°C) Maximum soldering temp should be limited to 260°C
2. Do not cause stress to the epoxy resin while it is exposed to high temperature
3. Number of reflow process shall be 1 time
www.p-tec.net
040615 Rev1 JAS
Page 6 of 13