PLC764A-WCY04 Datasheet, PDF (5/6 Pages) P-tec Corporation – Piranha LED

Precautions for Use
1. Recommended soldering conditions
1.1. Wave soldering
1.2. Recommended Soldering:
Power dissipation of iron should be smaller than 15W and temperature should be controllable.
Soldering temperature should be under 230, time 3sec.
2. Static Electricity
2.1 Static electricity or surge voltage damages LEDs.
It is recommended that a wrist band or an anti-electrostatic glove be used
when handling the LEDs.
2.2 All devices, equipment and machinery must be properly grounded. It is
recommended that measures be taken against surge voltage to the equipment
that mounts the LEDs.
www.p-tec.net
101514 Rev0 JAS
Page 5 of 6