PL85-WDRG2115 Datasheet, PDF (1/1 Pages) P-tec Corporation – 5mm Bi-Color (T1¾) LED

P-tec Corp.
2405 Commerce Circle
Alamosa Co. 81101
www.p-tec.net
Tel:[phone]
Tel:[phone]
Fax:[phone]
[e-mail]
PL85 Series 5mm Bi-Color (T1¾) LED
Features
*Popular 5mm Lens Style with Flange
*2 Leaded Bi-Color
*1 Super Bright Red and 1 Hi-Eff Green
Chip used
*Uniform Light Output
*Wide Viewing Angle
*RoHS Compliant
Absolute Maximum Ratings at T_A = 25°C
Power Dissipation Red.………………………………………………………………... 66mW
Power Dissipation Green..……………………………………………………………... 78mW
Reverse Voltage (<100µA)………..………….………………..………………………….. 5.0V
Max Forward Current…………..………………..………………….……….……....… 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)…………………….…………. 100mA
Operating Temperature Range…………………………………………...…. -25°C to +85°C
Storage Temperature Range..………….………………………………...…. -40°C to +100°C
Soldering Temperature (1.6mm below body)……………………………….. 260°C for 5 seconds
Electrical & Optical Characteristics at T_A = 25°C
Part Number
White Diffused Lens
PL85-WDRG2115
Emitting
Color
Dark Red
Green
Chip
Material
AlGaAs
GaP
Peak
Wave
Length
nm
Dominant
Wave
Length
nm
Viewing
Angle
2θ ½
Deg
Forward
Voltage
@20mA (V)
Typ Max
660
567
643
572
70°
1.8 2.2
2.1 2.6
Luminous
Intensity
@20mA (mcd)
Min
Typ
14.0
30.0
9.0
18.0
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1mm down the leads.
8.7
5.0
1.0
24.0Min.
R^Aeⁿd^{ode Green, Yellow}
G^Arⁿe^oe^dn^{e Red, Yellow}
5.9
2.54±0.1
1.5typ.
0.5 Square
02.15.07 REV 2 RS