PL70-CDG13 Datasheet, PDF (1/1 Pages) P-tec Corporation – Cylindrical LED

P-tec Corporation
2405 Commerce Circle
Alamosa Co. 81101
www.p-tec.net
Tel:[phone]
Tel:[phone]
Fax:[phone]
[e-mail]
PL70 Series Cylindrical LED
Features
*Flat Top 3mm Lens
with Flange
*GaP Green LED Chip used
*Very Wide Viewing Angle
*High Light Output
*Reliable and Rugged
*RoHS Compliant
Absolute Maximum Ratings at T_A = 25°C
Power Dissipation…………………………………………………………………………..…. 78mW
Reverse Voltage (<100µA)………..…………...……………………………………….……..… 5.0V
Max Forward Current…………..………………..…………………………………………..… 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)…………………….…………………. 100mA
Operating Temperature Range…………………………………………………….…. -25°C to +85°C
Storage Temperature Range..………….………………………………………….... -40°C to +100°C
Soldering Temperature (1.6mm below body)……………….………………….....… 260°C for 5 seconds
Part Number
Color Diffused Lens
Electrical & Optical Characteristics at T_A = 25°C
Emitting
Color
Chip
Material
Peak
Wave
Length
nm
Dominant
Wave
Length
nm
Viewing
Angle
2θ ½
Deg
Forward
Voltage
@20mA (V)
Typ Max
Luminous
Intensity
@20mA (mcd)
Min Typ
PL70-CDG13
Green
GaP
567
572
96°
2.1 2.6 2.5 5.5
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified. An epoxy meniscus may extend about 1mm down the leads.
6.1
3.0 2.95
0.9
24.0Min.
0.4
+0.5
-0.4
Anode
3.8
2.54±0.1
1.5typ.
0.5 Square
03-08-07 Rev 0 RS