PL520-1G13 Datasheet, PDF (1/1 Pages) P-tec Corporation – 5mm LED Snap-in Panel Mount Holder

P-tec Corp.
Tel:[phone]
2405 Commerce Circle Tel:[phone]
Alamosa Co. 81101 Fax:[phone]
www.p-tec.net
[e-mail]
PL520 Series 5mm LED Snap-in Panel Mount Holder
Features
*Snap-in Design Requires no Hardware
*Mounting Hole 6.35 mm (0.25”)
*Housing Material Black Nylon UL94V-2
*1 Green LED with Color Diffused
Lens used
*Standard Terminals
*RoHS Compliant
Absolute Maximum Ratings at T_A = 25 °C
Power Dissipation……………………………………………………………….... 78mW
Reverse Voltage (<100µA)….………………..……...…...…….………………….…. 5.0V
Max Forward Current…….…………..………………….……..…………………. 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)……........…………….….. 100mA
Operating Temperature Range……………………………………….…. -25°C to +85°C
Storage Temperature Range……………….....……………………….. –40°C to +100°C
Soldering Temperature (1.6 mm below body)………....………………….... 260° for 5 seconds
Part Number
Standard Leads
PL520-1G13
Electrical & Optical Characteristics at T_A = 25 °C
Emitting
Color
Chip
Material
Peak Dominant Viewing
Wave Wave Angle
Length Length 2θ ½
nm
nm
Deg
Forward
Voltage
@20mA (V)
Typ Max
Luminous
Intensity
@20mA (mcd)
Min Typ
Green
GaP
567
572
30°
2.1 2.6 17.0 35.0
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified.
Locking Shims (Tapered)
0.8
4.8
3.9±0.5
13.2
6.4
6.10 Typ.
2.54 ±.01
3.8
10.4 Typ.
02-15-07 Rev 0 RS