English
Language : 

PL520-1G13-2_14 Datasheet, PDF (1/1 Pages) P-tec Corporation – 5mm LED Snap-in Panel Mount Holder
P-tec Corp.
Tel:(866) 695 4162
2405 Commerce Circle Tel:(719) 589 3122
Alamosa CO 81101 Fax:(719) 589 3592
www.p-tec.net
PL520 Series 5mm LED Snap-in Panel Mount Holder
Features
*Snap-in Design Requires no Hardware
*Mounting Hole 6.35 mm (0.25”)
*Housing Material Black Nylon UL94V-2
*1 Green LED with Color Diffused
Lens used
*26AWG 6” (+) Red and (-) Black Wire
Leads
*RoHS Compliant
Absolute Maximum Ratings at TA = 25°C
Power Dissipation……………………………………………………………….... 78mW
Reverse Voltage (<100μA)….………………..……...…...…….………………….…. 5.0V
Max Forward Current…….…………..………………….……..…………………. 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)……........…………….….. 100mA
Operating Temperature Range……………………………………….…. -25°C to +85°C
Storage Temperature Range……………….....……………………….. -40°C to +100°C
Soldering Temperature (1.6 mm below body)………....……………….... 260°C for 5 seconds
Part Number
6” Wire Leads
Electrical & Optical Characteristics at TA = 25°C
Emitting
Color
Chip
Material
Peak Dominant Viewing
Wave Wave Angle
Length Length 2θ ½
nm
nm
Deg
Forward
Voltage
@20mA (V)
Typ Max
Luminous
Intensity
@20mA (mcd)
Min Typ
PL520-1G13-2
Green
GaP
567
572
30°
2.1 2.6 17.0 35.0
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified.
4.8
Front
0.8
3.9±0.5
7.32
Side
Locking Shims (Tapered)
13.2
6.4
6.05 Min. 6.17 Max.
Cathode Black
Striped and Tinned
Anode Red
3.8
152 Typ.
11.11.14 Rev1 JAS