PL519M-1RG2115 Datasheet, PDF (1/1 Pages) P-tec Corporation – 5mm LED Snap-in Panel Mount Holder

P-tec Corp.
Tel:[phone]
2405 Commerce Circle Tel:[phone]
Alamosa Co. 81101 Fax:[phone]
www.p-tec.net
[e-mail]
PL519M Series 5mm LED Snap-in Panel Mount Holder
Features
*Snap-in Design Requires no Hardware
*Mounting Hole 7.2 mm (0.287”)
*Housing Material Black Nylon UL94V-2
*1 Three Leaded Bi-Color Super Red/Green
LED with White Diffused Lens used
*Standard Terminals
*Common Cathode
*RoHS Compliant
Absolute Maximum Ratings at T_A = 25 °C
Power Dissipation Red……………………………………………………………. 66mW
Power Dissipation Green………………………………………………………….. 78mW
Reverse Voltage (<100µA)….………………..……...…...…….………………….…. 5.0V
Max Forward Current…….…………..………………….……..…………………. 30mA
Peak Forward Current (1/10 Duty Cycle, 0.1ms Pulse Width)……........…………….….. 100mA
Operating Temperature Range……………………………………….…. -25°C to +85°C
Storage Temperature Range……………….....……………………….. –40°C to +100°C
Soldering Temperature (1.6 mm below body)………....………………….... 260° for 5 seconds
Electrical & Optical Characteristics at T_A = 25 °C
Part Number
PL519M-1RG2115
Emitting
Color
Deep Red
Green
Chip
Material
AlGaAs
GaP
Peak Dominant Viewing
Wave Wave Angle
Length Length 2θ ½
nm
nm
Deg
660
643
567
572
70°
Forward
Voltage
@20mA (V)
Typ Max
1.8 2.2
2.1 2.6
Luminous
Intensity
@20mA (mcd)
Min Typ
50.0 90.0
30.0 50.0
All dimensions are in Millimeters. Tolerance is ± 0.25mm unless otherwise specified.
1.3
9.2
5.0
7.2
10.7
0.2 Min
6.35
Anode Green
Cathode Black
Anode Red
152 Typ
Stripped & Tinned
3.8 ±0.5
4.4 ±0.5
02-15-07 Rev 0 RS